《计网实验DNS, Data Encapsulation and Frame Examination》由会员分享，可在线阅读，更多相关《计网实验DNS, Data Encapsulation and Frame Examination（6页珍藏版）》请在金锄头文库上搜索。
1、精品文档，仅供学习与交流，如有侵权请联系网站删除Computer netowrks LabsDNS, Data Encapsulation and Frame ExaminationDNS, Data Encapsulation and Frame ExaminationLearning ObjectivesAt completion of this lab, you will be able to:1. Use Wireshark to capture and analyze DNS message2. Understand how DNS works3. use nslookup and
2、ipconfig commands4. Explain the header fields in an Ethernet II frame.5. understand data encapsulation6. Report and Feedback on this labAnswer all questions with supporting screenshots. Please fill in the following feedback form and append it to the report. Your feedback is valuable to us so that we
3、 can improve this lab, and make the course welcome.For each task, please rate the following in the scale of 1 through 5: The degree of difficulty: 1 = too easy; 5 = too difficult The learning experience: 1 = learned nothing; 5 = learned a lot Your interest: 1 = no interest; 5= high interest Time use
4、d for the task: in minutes Task Difficulty (15)Learning (15)Interest (15)Time ( min)Task 0Task 1Task 2Task 3Task 4Your suggestion/comment:BackgroundWhen upper layer protocols communicate with each other, data at the sending host flows down the TCP/IP protocol layers and is encapsulated into a protoc
5、ol data unit at lower layer, and finally encapsulated in a Layer 2 frame. For example, DNS message is often transported by UDP protocol on layer 4. So DNS message at the sending host is encapsulated in a UDP segment; the UDP segment is then encapsulated in an IP packet, and the IP packet is encapsul
6、ated finally in a layer 2 frame. The frame composition is dependent on the media access type, or the network. For example, if the media access is Ethernet, then the Layer 2 frame encapsulation will be Ethernet II. When learning about data encapsulation and protocol operations, it is helpful to analy
7、ze the header information found in the protocol data units. The DNS protocol operation, ipconfig command, and Ethernet II frame header will be examined in this lab. Ethernet II frames can support various upper layer protocols.For more background information, please read the lectures 02, 04-05, 10, 1
8、1. TasksTask 0 Protocol Layers and Data EncapsulationAs we have discussed in Lecture 02, Internet is inter-connected networks based on TCP/IP protocols. Read the slides or textbook to learn how data goes through protocol layers and how data is encapsulated in the protocol data units. There are conve
9、ntional names for the protocol data units for different layer protocols.Question 1. What are names for the protocol data units (PDUs) for layer 4, layer 3, and layer 2 protocols in TCP/IP reference model by filling the follow form: name for PDU of layer 4 protocols: segment name for PDU of layer 3 p
10、rotocol: packet name for PDU of layer 2 protocol: frame Task 1 DNS and nslookupAs we discussed, IP address is used to identify a host uniquely on the Internet. But IP address is not user-friendly and that is why domain name was introduced. The Domain Name System (DNS) translates host names to IP add
11、resses, providing a critical role in the Internet infrastructure. In this task, we practice the nslookup tool, which is available both in Linux/Unix and MS Windows. To run nslookup in MS Windows, you need to open the command line window by starting the command cmd.exe. With nslookup, you can query a
12、ny specified DNS server (by default, your local configured DNS server) for a DNS record. To accomplish this task, nslookup sends a DNS query to the specified DNS server, receives a DNS reply from that same DNS server, and displays the result.Type the command nslookup www.MIT.edu, and capture the out
13、put, as I did and showed below:Question 2: What is the DNS server IP address that is used to query and find IP address for www.MIT.edu? And IP address for www.MIT.edu ?Type the command “nslookup -type=NS ”, and capture the output, as I did and showed below:Question 3: What are domain name servers fo
14、r and their IP addresses?Type the command “nslookup ”, and capture the output, as I did and showed below:Question 4: Which DNS server is used to query and for name resolution?You can also use nslookup to find the mapping from IP addresses to the host names. Type the commands “nslookup 192.168.156.
15、101” and “nslookup ”, and capture the output, as I did and showed below:Question 5: Can a host have multiple host names? What is the IP address for moodle.tec.hkr.se? How many names do you find for this IP address? Task 2 DNS and ipconfigipconfig (for Windows) and ifconfig (for Linux/Unix, interface configuration) are among the most useful tools for debugging network issues. ipconfig can b
