《曲轴的加工工艺及夹具设计外文翻译参考word》由会员分享，可在线阅读，更多相关《曲轴的加工工艺及夹具设计外文翻译参考word（30页珍藏版）》请在金锄头文库上搜索。
1、毕业设计外文翻译题 目 曲轴的加工工艺及夹具设计 学 院 航海学院 专 业 轮机工程 学 生 佟宝诚 学 号 10960123 指导教师 彭中波 重庆交通大学 2014年推荐精选Proceedings of IMECE20082008 ASME International Mechanical Engineering Congress and ExpositionOctober 31-November 6, 2008, Boston, Massachusetts, USAIMECE2008-67447MULTI-OBJECTIVE SYSTEM OPTIMIZATION OF ENGINE C
2、RANKSHAFTS USINGAN INTEGRATION APPROACHAlbert Albers/IPEK Institute of Product DevelopmentUniversity of Karlsruhe GermanyNoel Leon/CIDyT Center for Innovation andDesignMonterrey Institute of Technology,MexicoHumberto Aguayo/CIDyT Center forInnovation and Design, Monterrey Institute ofTechnology, Mex
3、icoThomas Maier/IPEK Institute of Product Development University of Karlsruhe GermanyABSTRACTThe ever increasing computer capabilities allow faster analysis in the field of Computer Aided Design and Engineering (CAD & CAE). CAD and CAE systems are currently used in Parametric and Structural Optimiza
4、tion to find optimal topologies and shapes of given parts under certain conditions. This paper describes a general strategy to optimize the balance of a crankshaft, using CAD and CAE software integrated with Genetic Algorithms (GAs) via programming in Java. An introduction to the groundings of this
5、strategy is made among different tools used for its implementation. The analyzed crankshaft is modeled in commercial parametric 3D CAD software. CAD is used for evaluating the fitness function (the balance) and to make geometric modifications. CAE is used for evaluating dynamic restrictions (the eig
6、enfrequencies). A Java interface is programmed to link the CAD model to the CAE software and to the genetic algorithms. In推荐精选 order to make geometry modifications to our case study, it was decided to substitute the profile of the counterweights with splines from its original “arc-shaped” design. Th
7、e variation of the splined profile via control points results in an imbalanceresponse. The imbalance of the crankshaft was defined as an independent objective function during a first approach, followed by a Pareto optimization of the imbalance from both correction planes, plus the curvature of the p
8、rofile of the counterweights as restrictions for material flow during forging. The natural frequency was considered as an additional objective function during a second approach. The optimization process runs fully automated and the CAD program is on hold waiting for new set of parameters to receive
9、and process, saving computing time, which is otherwise lost during the repeated startup of the cad application.The development of engine crankshafts is subject to a continuous evolution due to market pressures. Fast market developments push the increase of power, fuel economy, durability and reliabi
10、lity of combustion engines, and calls for reduction of size, weight, vibration and noise, cost, etc. Optimized engine components are therefore required if competitive designs must be attained. Due to this conditions, crankshafts, which are one of the most analyzed engine components, are required to
11、be improved 1. One of these improvements relies on material composition, as companies that develop combustion engines have expressed their intentions to change actual nodular steel crankshafts from their engines, to forged steel crankshafts. Another important direction of improvement is the optimiza
12、tion of its geometrical characteristics. In particular for this paper is the imbalance, first Eigen-frequency and the forge-ability. Analytical tools can greatly enhance the understanding of the physical phenomena associated with the mentioned characteristics and can be automated to do programmed ta
13、sks that an engineer requires for optimizing a design 2.The goals of the present research are: to construct a strategy for the development of engine crankshafts based on the integration of: CAD and CAE (Computer Aided Design &Engineering) software to model and evaluate functional推荐精选parameters, Gene
14、tic Algorithms as the optimization method, the use of splines for shape construction and Java language programming for integration of the systems. Structural optimization under these conditions allows computers to work in an automated environment and the designer to speed up and improve the traditio
15、nal design process. The specific requirements to be satisfied by the strategies are:Approach the target of imbalance of a V6 engine crankshaft, without affecting either its weight or itsmanufacturability.Develop interface programming that allows integration of the different software: CAD for modeling and geometric evaluations, CAE for simulation analysis and evaluation ,Genetic Algorithms for optimization and search for alternatives .Obtain new design concepts for the shape of the counterweights that help the designer to develop a better crankshaft in terms o
