《【BS英国标准】BS EN 792132000 手持非电动工具.安全要求.紧固件旋具》由会员分享，可在线阅读，更多相关《【BS英国标准】BS EN 792132000 手持非电动工具.安全要求.紧固件旋具（37页珍藏版）》请在金锄头文库上搜索。
1、BRITISH STANDARDHand-held non-electric power tools Safety requirements Part 13: Fastener driving toolsThe European Standard EN 792-13:2000 has the status of aBritish StandardICS 25.140.01| BS EN792-13:2000|NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 792-13:2000Nationa
2、l forewordThis British Standard is the official English language version of EN 792-13:2000. The UK participation in its preparation was entrusted to Technical CommitteeMCE/8, Compressors, pneumatic tools, pneumatic machines and vacuum technology, which has the responsibility to: aid enquirers to und
3、erstand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committe
4、e can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index, or by using the
5、Find facility of the BSI Standards Electronic Catalogue.A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.Compliance with a British Standard does not of itself confer immunity from legal
6、 obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amd. No.DateCommentsThis British Standard, having been prepared
7、 under the direction of the EngineeringSector Committee, was published under the authority of the Standards Committee and comes into effect on 15 October 2000BSI 10-2000ISBN 0 580 36511 5Amendments issued since publicationEUROPEAN STANDARD NORME EUROPENNEEUROPISCHE NORMEN 792-13June 2000ICS 25.140.9
8、9English versionHand-held non-electric power tools - Safety requirements - Part13: Fastener driving toolsMachines portatives moteur non lectrique - Prescriptions de scurit - Partie 13: Machines enfoncer les fixationsHandgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Tei
9、l 13: EintreibgerteThis European Standard was approved by CEN on 10 March 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib
10、liographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o
11、f a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, No
12、rway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN DE NOR M A L I S A TI ON EUR O P I S C H ES KOM I TEE F R NOR M UNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 2000 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Ref. No. EN 792-13:2000 EPage 25EN 792-13:2000CONTENTSPageForeword.30Introduction .31Scope .
