《手机结构2D图技术标注参考规范》由会员分享，可在线阅读，更多相关《手机结构2D图技术标注参考规范（24页珍藏版）》请在金锄头文库上搜索。
1、德信无限通讯科技(上海)有限公司TechFaith Wireless Communication Technology (Shanghai) Co.,LTD.结构2D图 技术标注参考规范文件编号 ：QC1001保密等级 ：保密文件类型 ：管理办法有效期 ：3年页数 ：1/1版本 : 1.0编制日期 ：2004/05/24开始执行日：2005/07/01NO编制/变更日期变更理由变更内容版本编制/修改人批准12004/05/24新编0.1沈林王迅22006/01/04修改将2D标准样板图中技术标注更新到本文件中1.0蒋伟鹏丁勇目录索引01. Latch02. Antenna03.1 PCBA l
2、imited drawing03.2 PCBA outline drawing04. Battery 05.1 Lens(注塑)05.2 Lens(CNC)06.1 Audio cover06.2 RF_switch_cover07.1 Shielding cover07.2 Shielding frame 07.3 Spring08. Metal dome09. Stop TPU10. Light guide 11. Fpcba12.1 金属装饰件12.2 Logo12.3 Plating plastic12.4 Electroform13.1 双面胶13.2 泡棉13.3 铜箔13.4 绝
3、缘片14.1 Keypad asm14.2 keypad rubber14.3 Keypad 电镀键帽14.4 Keypad 数字键15.1 外观漆喷漆图15.2 导电漆喷漆图16. Housing part drawing17. Housing Assembly18. Explode01. Latch技术要求（Notes）:1. 材料：POM Dupont500, 用100%原材料; Material: POM Dupont500,use 100% raw material .2. 尺寸: 图面尺寸用于检验零件外形、功能和装配; 未注圆角R0.05,未注脱模斜度1度, 未注尺寸依照Pro/e
4、 3D Data; 标有环形圈:每批次出货均需检查；Qualify时需要做CP/CPK; Dimension: Specified dimensions in the drawing are used to check outside shape, function and assembly; Unspecified round: R0.05mm; Unspecified draft angle: 1%d; Unspecified dimensions refer to Pro/e 3D model data; Specified dimensions with marked ring are
5、 critical dimensions, need to be checked every shipment, and must do CP/CPK check in the Qualification stage.3. 公差：未注公差依照图面公差表; Tolerance: Unspecified tolerance should comply with tolerance table in the drawing;4. 外观：成品清洁、无杂质、无划伤、缩水及其它瑕疵; 飞边及分型线段差0.03mm;顶杆痕0.05mm;浇口凸出0.10mm; 穴号应刻在模具上，标志不得高于表面; 外观皮纹:
6、 VDI 24; Appearance：Product should be tidy and purity, no nick, no shrinkage and other blemish; Galling should be less than 0.03mm; Ejector rod mark should be less than 0.05mm; gate trim should be less than 0.10mm; Cavity number shall be located low on the surface. Appearance require:VDI 24.5. 检测须满足
7、德信质量标准:部品检验标准_注塑件_x.x_xxxxxx Product should be satisfied with quality standard of Techfaith Wireless:部品检验标准_注塑件_x.x_xxxxxx02. Antenna1.材料：见图,用100%原材料;1.Material: Refer to the drawing table, in original color and with 100% raw material.2.尺寸：图面尺寸用于检验零件外形、功能和装配; 未注圆角R0.05,未注脱模斜度1度, 未注尺寸依照Pro/e 3D Data;
8、 标有环形圈的是重点尺寸,每批次出货均需检查,Qualify时需要做CP/CPK；2.Dimension: Specified dimensions in the drawing are used to check outside shape, function and assembly;返回索引目录 Unspecified round: R0.05mm; Unspecified draft angle: 1; Unspecified dimensions refer to Pro/e 3D model data; Specified dimensions with marked ring a
9、re critical dimensions, need to be checked every shipment, and must do CP/CPK check in the Qualification stage.3.公差：未注公差依照图面公差表;3. Tolerance: Unspecified tolerance should comply with tolerance table in the drawing;4.外观: 成品清洁、无杂质、无划伤、缩水及其它瑕疵;飞边及分型线段差0.03mm,顶杆痕0.05mm;浇口凸出0.05mm;穴号应刻在模具上，标志不得高于表面;外观皮纹：
10、抛光4.Appearance：Product should be tidy and purity, no nick, no shrinkage and other blemish;Galling shall be less than 0.03mm, ejector rod mark shall be less than 0.05mm, gate trim shall be less than 0.05mm.Cavity number shall be located low on the surface. Surface shall be smooth.5.电气性能依照规格书：violet1-
11、Antenna SPEA-05-02-18.pdf。5.Electro performance shall be according to spec: violet1-Antenna SPEA-05-02-18.pdf6.喷涂: 范围:见喷漆图； 油漆颜色及色差:E1； 喷漆厚度: 底漆8-10 um；UV10-12 um； 油漆硬度:2H，500gf； 油漆耐磨:RCA 300 cycles； 油漆附着力:百格实验，脱落面积3%.6.Coating:Painting range:refer to the painting drawing.Paint color and aberration:
12、 E1 Paint thickness:BC 8-10 um；UV10-12 um；Paint hardness test: 2H，500gfPaint abrasion test: RCA 300 cyclesPaint peeling test: area of peeling3%.7.包装与运输:零件独立包装,放入托盘对应的凹穴,托盘层堆放入纸箱;7.Package and Transport: Product should be packaged independent, and lay in tray, finally put the trays in the paper box;8
13、.检测须满足德信质量标准： 部品检验标准-天线VX.X8.Product should be satisfied with quality standard of Techfaith Wireless: 部品检验标准-天线VX.X.03.1 PCBA Limited drawing 1. 区域限高为电子元件限高，不包括SHIELDING和图中已经标出的结构电子件。返回索引目录 (Shielding) -指可以放置屏蔽罩区域。放置屏蔽罩时，罩内元件限高； (No Shielding)-指可以放置屏蔽罩区域。不放置屏蔽罩时元件限高； Limiting Height for shielding ar
14、ea is only for electronic componets inside , not including shielding and the mechanical electronic components been included in this drawing; (Shielding) -Shielding is allowable is this area.The limiting height for the components with shielding； (No Shielding)-Shielding is allowable is this area.The limiting height for the components without shielding；2. 器件准确位置以文件中的 直角顶点为准;IO ConnAudio jack etc.位置以PCB定位孔为准; The vertex of the right-angle indicate the center of the componets .
