《DELL交换机关闭节能开关（精品）》由会员分享，可在线阅读，更多相关《DELL交换机关闭节能开关（精品）（4页珍藏版）》请在金锄头文库上搜索。
1、1、DELL交换机设置管理IP以及用户名密码consoleenconsole#console# delete startup-config -删除配置Delete startup-config y/n? yconsole# 01-Oct-2006 18:15:40 %FILE-I-DELETE: File Delete - file URL flash:/startup-configconsole# reloadYou havent saved your changes. Are you sure you want to continue ? (Y/N)N YThis command will
2、 reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)N YShutting down .Shutting down .Resetting local unitShutting down .以下是DELL交换机开机时配置引导：Welcome to Dell Easy Setup Wizard.The Setup Wizard guides you through the initial switch configuration, and getsyou up and
3、 running as quickly as possible. You can skip the setup wizard, andenter CLI mode to manually configure the switch.The system will prompt you with a default answer; by pressing enter, you acceptthe default.You must respond to the next question to run the setup wizard within60 seconds, otherwise the
4、system will continue with normal operation usingthe default system configuration.Would you like to enter the setup wizard (you must answer this question within60 seconds)? (Y/N)Y YYou can exit the Setup Wizard at any time by entering ctrl+Z.The system is not setup for SNMP management by default.To m
5、anage the switch using SNMP (required for Dell Network Manager) you can* Setup the initial SNMP version 2 account now.* Return later and setup additional SNMP v1/v3 accounts.For more information on setting up SNMP accounts, please see the userdocumentation.Would you like to setup the SNMP management
6、 interface now? (Y/N)Y YTo setup the SNMP management account you must specify the management system IPaddress and the community string or password that the particular managementsystem uses to access the switch. The wizard automatically assigns the highestaccess level Privilege Level 15 to this accou
7、nt.You can use Dell Network Manager or CLI to change this setting, and to addadditional management systems. For more information on adding managementsystems, see the user documentation.To add a management station:Please enter the SNMP community string to be used: Dell_Network_ManagerPlease enter the
8、 IP address of the Management System (A.B.C.D) or wildcard(0.0.0.0) to manage from any Management Station:0.0.0.0默认回车Now we need to setup your initial privilege (Level 15) user account.This account is used to login to the CLI, Telnet and Web interface.You may setup other accounts and change privileg
9、e levels later.For more information on setting up user accounts and changing privilege levels,see the user documentation.To setup a user account:Enter the user name:admin-输入用户名Please enter the user password:*-输入密码Please reenter the user password:*-输入密码Next, an IP address is setup.The IP address is d
10、efined on the default VLAN ,(VLAN #1) . This is the IPaddress you use to access the Telnet, Web interface, or SNMP interface for theswitch. To setup an IP address:Please enter the IP address of the device (A.B.C.D):192.168.100.101-设置管理IPInvalid input - please reenterk (A.B.C.D or nn):255.255.255.0掩码
11、Please enter the IP subnet mask (A.B.C.D or nn):255.255.255.0Finally, setup the default gateway.Please enter the IP address of the gateway from which this network is reachable(e.g. 192.168.1.1).Default gateway (A.B.C.D):0.0.0.0网关默认回车This is the configuration information that has been collected:=User
12、 Account setup = adminPassword = *console# show rconsole# show rManagement IP address = 192.168.100.101 255.255.255.0=If the information is correct, please select (Y) to save the configuration, andcopy to the start-up configuration file. If the information is incorrect,select (N) to discard configur
13、ation and restart the wizard: (Y/N)Y YConfiguring SNMP management interface.Configuring user account.Configuring IP and subnet.Thank you for using Dell Easy Setup Wizard. You will now enter CLI mode.interface vlan 1 ip address 192.168.100.101 255.255.255.0console#2、DELL交换机如何关闭节能功能2-1、单个端口关闭EEE打开交换机的
14、web控制台，switching-ports-port configuration-edit,将其中的Engrgy Efficient Ethernt选项改成Disable。选好后点击apply,都选好后保存。2-2、整个交换机关闭EEE打开交换机的web控制台，switching-ports-Green Ethernt configuration-edit,将其中的Engrgy Efficient Ethernt选项改成Disable。选好后点击apply,然后保存2-3、通过命令关闭EEE用串口线连接交换机后, 在全局及端口模式下输入 no eee enable，具体如下：console en console# configure terminalconsole(config)# no eee enableconsole(config)# interface vlan 1console(config-if)# no eee enableconsole(config-if)# exitconsole(config）# exitconsole# write
