《控制计划模板》由会员分享，可在线阅读，更多相关《控制计划模板（1页珍藏版）》请在金锄头文库上搜索。
1、.wdPart Description/产品描述: SUPPLY SEAT 撰写人 / 联系方式： XXXX 123456789112Team Leader/Phone/：XXXXXX 123456478585Orig. Date/编制日期:2015-7-2文 件 版 本： ACurrent Rev: ADate/日期：2010.7.2Part Number/零件编号:123456-770团队成员:XXXX、XXX、XXX、XXX、XXX、Team Members:XXXX、XXXX 、XXXX、XXXXX、XXXXXRemark/备注: Critical/重要 Safety/安全 Syste
2、m/系统图 纸 版 本： CDrawing Revision: C审核 / 日期:XXX 2010.7.2Checkd/Date:Fei Zhang 2010.7.2供 应 商: XXXXX金属Supplier/Location: XXXXXX客 户 批 准 / 日 期：Customer Approval / Date:批 准 / 日期:IvanXXX Approval/Date:Ivan XXX Process Descriptions/过程描述产品/过程特性Product / process characteristicsRisk: Major Average Minor/不安全等级：重要
3、、普通、较小Methods/方法预防行动Reaction Plan工序Step工序名称、作业描述DescriptionMachine and Tool Number/生产设备及机台编号客户图尺寸/Customer sizeSerial number / key/序号/重点测量方法仪器Evaluation/Measurement Method检测数量Sample Size检测频率Sample Frequency控制方法Control Method/00来料检验Incoming Inspectionmolding machine /型材机Incomingcertificate来料证书major/重
4、要material/材质: 303 S.ST(1)Certification./证明Ounce/盎司IQC incoming inspection IQC 来料检查If non-conformance is found: 1)inform supplier;2)return parts to supplier;3)SCAR issue per Incoming QP-PR-009 /如果不符合要求，行动如下：1通知供给商；2返回给供给商；3按照QP-PR-009来料检验程序填写ROHS/环保SGS报告SGS ReportHRC15-26Sclerometer/硬度仪AQL0.65 Level
5、II C=0Per LOT/每批Dimensionalinspection尺寸检查160.1(MM)Caliper/卡尺500xN(MM)Tape/卷尺01Cut down/下料Cutting/锯床Dimensional inspection尺寸检查major/重要CMM/三次元1PCSOn 11Hourly Basis/11小时IPQC Check/IPQC检查If non-conformance is found:1)Stop line;2)Identify and separate part to MRB;3)Adjust machines per QP-PR-010/如果不符合要求，行
6、动如下:1)通知停机;2)分货和隔离到MRB仓;3)调整机台，按照 QP-PR-010检测程序处理。4971(MM)Tape/卷尺Visual/外观major/重要The workpiece surface can not have any scratches, crush, bumps and other bad appearance./工件外表不可有任何刮伤、压伤、碰伤等外观不良。naked eyes/目测5PCSOn 2 Hourly Basis/2小时IPQC Check/IPQC检查Process Descriptions/过程描述产品/过程特性Product or Process
7、CharacteristicRisk: Major Average Minor/不安全等级：重要、普通、较小Methods/方法预防行动Reaction Plan工序Step工序名称、作业描述DescriptionMachine and Tool Number/生产设备及机台编号客户图尺寸/Customer sizeINCHSerial number / key/序号/重点测量方法仪器Evaluation/Measurement Method检测数量Sample Size检测频率Sample Frequency控制方法Control Method/02Lathe 1 /车加工1CNC lath
8、e/数控车床Dimensional inspection尺寸检查major/重要33CMM/三次元1PCSOn 2 Hourly Basis/2小时IPQC Check /IPQC检查If non-conformance is found:1)Stop line;2)Identify and separate part to MRB;3)Adjust machines per QP-PR-010/如果不符合要求，行动如下:1)通知停机;2)分货和隔离到MRB仓;3)调整机台，,按照 QP-PR-010检测程序处理。40CMM/三次元44CMM/三次元7.170.1345Height meter
9、/高度表On 5 Hourly Basis/5小时2.750.1336Pin gauge/塞规11.100.1332Outside micrometer /外径千分尺坑卡2XR0.250.25(10)Projection/投影仪 15.000.1337Outside micrometer /外径千分尺Visual/外观major/重要The workpiece surface can not have bumps, scratches and other bad appearance /工件外表不可有碰伤、划伤等外观不良naked eyes/目测5PCSOn 2 Hourly Basis/2小
10、时IPQC Check/IPQC检查03CNC1CNC milling machine /数控铣床Dimensionalinspection尺寸检查major/重要4X 6.000.15(38)Pin gauge/塞规1PCSOn 5 Hourly Basis/5小时IPQC Check/IPQC检查(37)CMM/三次元On 2 Hourly Basis/2小时43Height gauge/高度仪Visual/外观major/重要The workpiece surface can not have bumps, scratches and other bad appearance /工件外表
11、不可有碰伤、划伤等外观不良naked eyes/目测5PCSOn 2 Hourly Basis/2小时IPQC Check/IPQC检查Process Descriptions/过程描述产品/过程特性Product or Process CharacteristicRisk: Major Average Minor/不安全等级：重要、普通、较小Methods/方法预防行动Reaction Plan工序Step工序名称、作业描述DescriptionMachine and Tool Number/生产设备及机台编号客户图尺寸/Customer sizeINCHSerial number / ke
12、y/序号/重点测量方法仪器Evaluation/Measurement Method检测数量Sample Size检测频率Sample Frequency控制方法Control Method/04Lathe 2/车加工2CNC lathe/数控车床Dimensional inspection尺寸检查major/重要 13.720.1341Outside micrometer /外径千分尺1PCSOn 5 Hourly Basis/5小时IPQC Check /IPQC检查If non-conformance is found:1)Stop line;2)Identify and separat
13、e part to MRB;3)Adjust machines per QP-PR-010/如果不符合要求，行动如下:1)通知停机;2)分货和隔离到MRB仓;3)调整机台，,按照 QP-PR-010检测程序处理。8.000.1323Projection/投影仪65.000.2519CMM/三次元R0.4+0/-0.420Projection/投影仪 9.000.1329Pin gauge/塞规0.750.13(15)Projection/投影仪452.5(16)Projection/投影仪0.250.13(17)Projection/投影仪452.5(18)Projection/投影仪Ra0.8(9)CPK keyRoughness instrument/粗糙度仪0.300.0222Projection/投影仪1PCSOn 2 Hourly Basis/2小时42CMM/三次元 9.5000.00527Pin gauge/塞规(26)CMM/三次元28CMM/三次元10.950.0524Height meter/高度表25CMM/三次元Visual/外观major/重要The workpiece surface can not have bumps, scratches and other bad appearance /工件外表不可有碰伤、划伤等
