《kkkap风机的运行维护手册(中英文对照)》由会员分享，可在线阅读，更多相关《kkkap风机的运行维护手册(中英文对照)（84页珍藏版）》请在金锄头文库上搜索。
1、专业 专心 专注Operating and Maintenance Manualfor Fans Type KK&KKK&K风机的运行和维护手册Type:类型：CKPF-Job-No.:工作号：Machine-No.:设备号：Application:应用：Year of design:设计年份：Client No.: 客户号Plant:厂家：Plant Location:厂家地址：Chengdu KK&K Power Fan Co. Ltd. 成都KK&K电站风机有限公司610041 Changyi Road 12 610041 长益路 12Wuhou District Chengdu Cit
2、y 成都市武侯区Sichuan Province 四川省Tel. +86 Fax +86 This instruction is exclusive property of Chengdu KK&K Power Fan Co. Ltd.Availability is limited to supervisors or service personnel. Surrender to or access by third persons, as well as duplication of the plant in its entirety or in parts is prohibited. W
3、e reserve the right to claim for full reimbursement of all damages resulting form non-compliance.We must point out that these operating instructions cannot always cover every eventuality completely. Accordingly they do not free the operator from the usual responsibility when operating technical equi
4、pment also in respects of health, safety and environmental protection. It is assumed that the operation personnel has been instructed and knows how to run the plant.No claims of any kind may be derived from these operating & maintenance instructions.该说明书版权为成都KK&K所有。仅限管理和服务人员使用。不允许第三方使用、完全或部分拷贝该说明书。我
5、方保留索赔权。我们需要指出这些运行操作说明书不能包括所有的不可预测的情况。因此在操作时，还应警示个人健康，安全，以及对环境的保护等。本说明书供组装、运行、维护人员认真阅读，严格遵循，风机的组装和维护工作必须由专业人员承担。操作人员需要掌握如何操作这些设备。目 录1.OPERATING DATA运行参数61.1.PRESSURE INDICATIONS压力指示61.2.OPERATING CONDITIONS 运行条件61.3.LIMITATIONS TO OPERATING DATA 运行参数限制61.4.PERFORMANCE GRAPH 性能曲线71.5.STARTING TORQUES
6、AND MASS MOMENT OF INERTIA 启动力矩和转动惯量81.6.ACOUSTICS声学82.DESCRIPTIONS简介92.1.FLUIDIC EFFECT (1-STAGE)工作原理（单级）92.2.FLUIDIC EFFECT (2-STAGE)工作原理（双级）92.3.DESCRIPTION OF THE FAN风机（部件）简介92.3.1.STATOR COMPONENTS静止件102.3.2.ROTOR (1-STAGE) 转子（单级）112.3.3.ROTOR (2-STAGE) 转子（双级）112.3.4.IMPELLER (1-STAGE, WITH COU
7、NTERWEIGHTS) 叶轮（单级，带平衡锤）112.3.5.IMPELLER (2-STAGE, WITH COUNTERWEIGHTS) 叶轮（双级，带平衡锤）112.3.6.IMPELLER (1-STAGE, WITHOUT COUNTERWEIGHTS)叶轮（单级，不带平衡锤）112.3.7.IMPELLER (2-STAGE, WITHOUT COUNTERWEIGHTS)叶轮（双级，不带平衡锤）122.3.8.BLADE ADJUSTMENT叶片调节122.3.9.BLADE BEARINGS 叶片轴承132.3.10.SHAFT (1-STAGE) 主轴（单级）132.3.1
8、1.SHAFT (2-STAGE) 主轴（双级）132.3.12.SERVOMOTOR (1-STAGE)伺服马达（单级）132.3.13.SERVOMOTOR (2-STAGE)伺服马达（双级）132.3.14.CONTROL HEAD控制头132.3.15.ADJUSTING PISTON油缸132.3.16.ADJUSTING DISC (1-STAGE) 调节盘（单级）142.3.17.ADJUSTING DISC (2-STAGE)调节盘（双级）142.3.18.ROTOR BEARINGS (ANTIFRICTION BEARING) 主轴承（滚动轴承）142.3.19.ROTOR
9、 BEARINGS (SLEEVE BEARING) 主轴承（滑动轴承）142.3.20.ACCESSORIES附件153.OPERATION/运行163.1.TECHNICAL PLANT REQUIREMENTS技术设备要求163.1.1.OPERATING RANGE工作运行区域163.1.2.SECURITY安全173.1.3.ADJUSTMENT调节193.2.PRIOR TO TEST RUN/ COMMISSIONING/ OVERHAULS试运转前期/试运转/检查213.3.TEST RUN试运行223.4.STARTING UP启动233.5.SHUTTING DOWN关机2
10、43.6.MONITORING DURING OPERATION运行监控244.MAINTENANCE 维护264.1.DURING OPERATION风机运行期间264.2.OIL MAINTENANCE油系统维护264.3.MAINTENANCE INTERVALS & SCOPE计划停机（检修）维护274.3.1.FAN壳体274.3.2.IMPELLER 叶轮284.3.3.SERVOMOTOR伺服马达294.3.4.MAIN BEARINGS主轴承294.3.5.ADJUSTMENT DEVICE调节装置304.4.UNSCHEDULED STOPPAGE 非计划停机维护304.5.
11、WEAR DATA (ID/ FGD FAN ONLY)磨损数据（仅适用于引风机/增压风机）315.ASSEMBLY组装325.1.FAN风机345.1.1.PREPARATION 准备345.1.2.CHECKS 检查345.1.3.ASSEMBLY 组装345.1.4.CONNECTIONS 连接355.1.5.FUNCTION TESTS 功能测试355.2.SEALS, PARTS SUBJECT TO WEAR密封件和易损件的拆装365.3.ROTOR转子365.3.1.LIFTING OFF THE HOUSING COMPONENTS 机壳部分的起吊365.3.2.DISCONN
12、ECTION 拆卸375.3.3.REMOVING ROTOR BLADES 拆卸动叶片385.3.4.ROTOR REMOVAL 转子的拆卸385.3.5.FITTING THE ROTOR 组装转子385.3.6.FITTING ROTOR BLADES动叶片组装385.3.7.SECURING THE CONNECTIONS 连接保护385.3.8.FITTING THE HOUSING COMPONENTS 壳体部件的组装395.4.IMPELLER叶轮405.4.1.REMOVAL OF ROTOR 转子拆卸405.4.2.BLADE-BEARING REMOVAL 叶片轴承的拆卸4
13、05.4.3.DISASSEMBLY OF THE ADJUSTING LEVER 曲柄的拆卸415.4.4.ASSEMBLY OF ADJUSTING LEVER 曲柄的组装415.4.5.ASSEMBLY OF BLADE BEARING 叶片轴承的组装425.5.ROTOR BLADES动叶片455.5.1.REMOVAL 拆卸455.5.2.FITTING 组装455.6.SERVOMOTOR伺服马达485.6.1.REMOVAL FROM THE IMPELLER 从叶轮上拆卸485.6.2.FITTING TO THE IMPELLER 组装到叶轮上495.7.ADJUSTING
14、DISC (1-STAGE) 调节盘（单级）495.7.1.DISASSEMBLY 拆卸495.7.2.ASSEMBLY 组装495.8.ADJUSTING DISC (2-STAGE) 调节盘（双级）495.8.1.DISASSEMBLY拆卸495.8.2.ASSEMBLY组装515.9.MAIN BEARINGS (ANTIFRICTION BEARING) 主轴承（滚动轴承）515.9.1.DISASSEMBLY拆卸515.9.2.ASSEMBLY组装525.10.MAIN BEARING (SLEEVE BEARING) 主轴承（滑动轴承）555.10.1.DISASSEMBLY拆卸555.10.2.ASSEMBLY组装565.11.SHAFT SEALS轴封：575.11.1.DISASSEMBLY拆卸575.11.2.ASSEMBLY组装575.12.NOTES ON THE COUPLING联轴器提示595.13.HYDRAULIC ASSEMBLY SHAFT/ IMPELLER液压组装主轴与叶轮595.13.1.
