《5619 Conduct an occupational health and safety management》由会员分享，可在线阅读，更多相关《5619 Conduct an occupational health and safety management（4页珍藏版）》请在金锄头文库上搜索。
1、TitleConduct an occupational health and safety management systems audit for a selected business operationLevel4Credits15PurposeThis unit standard is for people who are working with health and safety professionals to undertake an occupational health and safety audit.People credited with this unit sta
2、ndard are able to: demonstrate knowledge of New Zealand occupational health and safety management standards; plan an occupational health and safety management systems audit; conduct an occupational health and safety management systems audit; and document and report results of an occupational health
3、and safety management systems audit, for a selected business operation.ClassificationOccupational Health and Safety Occupational Health and Safety PracticeAvailable gradeAchievedExplanatory notes1Industry standards relevant to this unit standard include but are not limited to AS/NZS 4804:2001 Occupa
4、tional Health and Safety Management Systems - General guidelines on principles, systems and supporting techniques; Accident Compensation Corporation (ACC) Partnership Programme; Accident Compensation Corporation (ACC) Workplace Safety Management Practices (WSMP), available at :/ acc.co.nz. 2Definiti
5、onOrganisational requirements instructions to staff on policies and procedures which are documented in memo, electronic or manual format and are available in the workplace.3The candidate will use the occupational health and safety management system developed for use in their workplace as evidence fo
6、r assessment. The results of the audit will need to be checked and signed off by a health and safety professional and any feedback incorporated into the final report.Outcomes and evidence requirementsOutcome 1Demonstrate knowledge of New Zealand occupational health and safety management standards fo
7、r a selected business operation.Rangestandards include but are not limited to AS/NZS 4804:2001; ACC Partnership Programme, WSMP.Evidence requirements1.1The systems principles/elements set out in AS/NZS 4804:2001 are identified and explained in terms of their purpose.Rangeevidence of five is required
8、.1.2The sub-headings for Principle/Element 3 (Implementation) and Principle/Element 4 (Measurement and Evaluation) of AS/NZS 4804:2001 are identified and explained in terms of their purpose.1.3The critical health and safety elements set out in the ACC Partnership and WSMP programmes are identified a
9、nd explained in terms of their purpose.Rangeevidence of eight in total is required.Outcome 2Plan an occupational health and safety management systems audit for a selected business operation.Evidence requirements2.1The organisations critical activities and health and safety requirements are identifie
10、d and described in terms of their relationship to planning a health and safety management systems audit.2.2An audit agenda is developed and communicated to those involved in the audit in accordance with organisational requirements.Rangeagenda includes but is not limited to description of the audit p
11、urpose, audit approach, process for endorsement from stakeholders.Outcome 3Conduct an occupational health and safety management systems audit for a selected business operation.Evidence requirements3.1Information for the audit is collected in accordance with organisational requirements.3.2Results of
12、the audit are checked with a health and safety professional in accordance with organisational requirements.3.3Results are analysed and any non-compliance is followed up in accordance with organisational requirements.Outcome 4Document and report results of an occupational health and safety management
13、 systems audit for a selected business operation.Evidence requirements4.1Results are documented in accordance with organisational requirements.4.2Reports summarising results are prepared and distributed in accordance with organisational requirements.Planned review date31 December 2021Status informat
14、ion and last date for assessment for superseded versionsProcessVersionDateLast Date for AssessmentRegistration123 October 199831 December 2021Revision29 August 199931 December 2021Revision314 March 200231 December 2021Review427 August 200231 December 2021Revision516 May 200531 December 2021Review625
15、 May 200731 December 2021Review721 July 2021N/AConsent and Moderation Requirements (CMR) reference0171This CMR can be accessed at :/ nzqa.govt.nz/framework/search/index.do.Please noteProviders must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.Industry Training Organisations must be granted consent to assess against standards by NZQA before they can reg
