《TS 29.389 V1.0.0 (2017-03) Inter-V2X Control Function Signalling aspects (V6);》由会员分享，可在线阅读，更多相关《TS 29.389 V1.0.0 (2017-03) Inter-V2X Control Function Signalling aspects (V6);（20页珍藏版）》请在金锄头文库上搜索。
1、3GPP TS 29.389 V1.0.0 (2017-03)Technical Specification3rd Generation Partnership Project;Technical Specification Group Core Network and Terminals;Inter-V2X Control Function Signalling aspects (V6);Stage 3(Release 14)The present document has been developed within the 3rd Generation Partnership Projec
2、t (3GPP TM) and may be further elaborated for the purposes of 3GPP.The present document has not been subject to any approval process by the 3GPP Organizational Partners and shall not be implemented.This Specification is provided for future development work within 3GPP only. The Organizational Partne
3、rs accept no liability for any use of this Specification.Specifications and Reports for implementation of the 3GPP TM system should be obtained via the 3GPP Organizational Partners Publications Offices.3GPP TS 29.389 V1.0.0 (2017-03)20Release 14.Keywords3GPP, V2X3GPPPostal address3GPP support office
4、 address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16Internethttp:/www.3gpp.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in a
5、ll media. 2017, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TSDSI, TTA, TTC).All rights reserved.UMTS is a Trade Mark of ETSI registered for the benefit of its members3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational PartnersLTE is a Trad
6、e Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational PartnersGSM and the GSM logo are registered and owned by the GSM AssociationContentsForeword51Scope62References63Definitions and abbreviations73.1Definitions73.3Abbreviations74General Description74.1Introduction7
7、5Procedure Description75.1Introduction75.2V2X Service Authorization75.2.1General75.2.2Detailed behaviour of the V2X Control Function in the HPLMN85.2.3Detailed behaviour of the V2X Control Function in the VPLMN96Protocol Specification and Implementations96.1Introduction96.1.1Use of Diameter base pro
8、tocol96.1.2Securing Diameter Messages96.1.3Accounting functionality96.1.4Use of sessions96.1.5Transport protocol106.1.6Routing considerations106.1.7Advertising Application Support106.1.8Diameter Application Identifier106.1.9Use of the Supported-Features AVP106.2Commands116.2.1Introduction116.2.2Comm
9、and-Code values116.2.3ProSe-Authorization-Request (PAR) Command116.2.4ProSe-Authorization-Answer (PAA) Command126.3Information Elements126.3.1General126.3.2V2X-Authorization-Data136.3.3V2X-Permission-in-VPLMN146.3.4V2X-Application-Server146.3.5Application-Server146.3.6Geographical-Information146.3.7
10、OC-Supported-Features146.3.8OC-OLR146.3.9DRMP146.4Result-Code AVP and Experimental-Result AVP Values156.4.1General156.4.2Success156.4.3Permanent Failures156.4.3.1General156.4.3.2DIAMETER_ERROR_USER_UNKNOWN (5001)156.4.3.3DIAMETER_ERROR_UNKNOWN_V2X_SUBSCRIPTION (5690)156.4.3.4DIAMETER_ERROR_V2X_NOT_A
11、LLOWED (5691)15Annex A (normative):Diameter overload control mechanism16A.1General16A.2Responding V2X Control Function behaviour16A.3Requesting V2X Control Function behaviour16Annex B (Informative):Diameter overload node behaviour18B.1Message prioritization18Annex C (normative):Diameter message prio
12、rity mechanism19C.1General19C.2V6 interfaces19C.2.1General19C.2.2V2X Control Function behaviour19Annex D (informative): Change history20ForewordThis Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP).The contents of the present document are subject to continui
13、ng work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows:Version x.y.zwhere:xthe first digit:1presented to
14、 TSG for information;2presented to TSG for approval;3or greater indicates TSG approved document under change control.ythe second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.zthe third digit is incremented when editorial only changes have
15、been incorporated in the document.1ScopeThe present document describes the Diameter-based interfaces between the V2X Control Function in the HPLMN and the V2X Control Function in the VPLMN (V6 interface).This specification defines the Diameter application for V6 reference points between the V2X Control Functions. The interactions between the V2X Control Functions are specified.The stage 2 description for V2
