《霍尼韦尔pks r400完整装机步骤》由会员分享，可在线阅读，更多相关《霍尼韦尔pks r400完整装机步骤（25页珍藏版）》请在金锄头文库上搜索。
1、PKS C400装机步骤Generate Configuration Files Run Experion PKS System Initialization DVD in Windows. 在一台计算机上放入INITIALIZATION DVD，自动运行安装程序。 选择 Launch Setup 选择Generate Configuration Files Click Next to continue. 选择所要安装的机器类型，上图是所支持的Station的型号。 这是所支持的Server的型号，下面以DELL T5500安装F-Station为例 这里输入计算机名称、用户帐户和密码，在初始
2、化盘作安装配置文件时，需要将用户的名字设为系统默认的名称：Experionadmin，密码随意。此用户名也可使用其它名称，但绝对不可以设为administrator或mngr或HPSinstall等名称，这些用户在使用初始化盘安装后会被禁掉，将无法登陆计算机。 如果所输入密码不符密码安全性时会有提示，可以选择忽略这个问题继续安装，也可返回修改密码。 这里选择网络类型及网络定义，点击下一步 这里是一个汇总的信息，点击Generate Product Install Config. Files，系统提示需要Installation DVD然后又出现节点类型画面 选择好后点NEXT（安装服务器，请选
3、择“Server(ESV)”；若安装操作站请选择相应类型的操作站，如“Console Station(ES-C)”或“Flex Station(ES-F)”） 按照以上选择后选NEXT（注意“Customer Information”里面的两项中填写项目名和用户公司名称）这里填入的Password应与前面的尽量保持一致，填好之后选NEXT,下一步中点Continue，下一步在Save Config.Files中选择一个保存配置文件的路径，保存好之后拷贝到U盘中将保存有安装配置文件“Config.Files”的U盘插到将要安装PKS R400的机器上，然后启动计算机，插入Initializati
4、on光盘，启动时按着F12，进入到安装界面，系统会自动安装，在安装过程中系统会提示选择安装配置文件，选择到U盘中存的“Config.Files”即可。以下是详细安装步骤 In the target machine, insert Experion PKS System Initialization media and boot from the Experion PKS System Initialization media. Ensure that Boot Sequence in BIOS is set to boot from CD/DVD drive first. Please kee
5、p watching the screen while booting, and press any key as soon as you see the message “Press any Key to Boot from CD or DVD” When the system boots from Experion PKS System Initialization media, WinPE is loaded into the target machine and the Experion PKS System Initialization PreInstall Utility scre
6、en appears. Browse to the configuration files and select InitMediaOptions.xml file. Click Next. This xml file can be located on a floppy disk, local system drive, or USB pen drive. Experion PKS System Initialization PreInstall Utility loads the configuration information from Options files. You can s
7、elect “Use Drive C:” if they want to format only C drive and install OS on this drive. In this case, data on the other partitions will be retained. This option needs to be selected only if the system is having more than one partition and no raw partitions. Enter configuration details for hard disk i
8、n the Disk Configuration section. Select the appropriate media location. 这里选DVD Enter the IP details, Subnet Mask, and Default Gateway in the Network Configuration for local machine section. Click Next. Select the I accept the terms in the License agreement radio button on the License Agreement scre
9、en after reading the EULA. Click Install. If it is a media-based install, the system prompts for the media. Once the OS installation is completed, insert Experion PKS System Initialization DVD again when you see this Experion PKS System Initialization R400.1 dialog box.If the autorun dialog pops up,
10、 close the dialog. During installation, if you see “Restart Now” prompts, no action is expected. The system will reboot automatically. During installation, if you see any “Found New Hardware” messages, no action needs to be taken. The system restarts several times automatically during Experion PKS S
11、ystem Initialization. If the media is already present in the local machine, installation proceeds without prompting Experion PKS System Initialization media.Install status will appear showing which feature is being installed/run, an approximate time for the feature and overall install to run and a d
12、escription/message area that gives information for the install. The R400.1 Experion PKS System Initialization sequencer is running in the background sequentially running install features and communicating to the status. If product installation was selected installation DVD is prompted. Click Cancel
13、if you want to cancel the install. It can be restarted at the point of cancellation at a later time by running setup.exe. Click OK to finish the installation once you get the install complete message. The system reboots automatically. If it fails to automatically reboot, then reboot the computer man
14、ually. Click setup.exe to restart the installation Two methods to install PKS Configuration files to target computer.二. 安装后的系统配置1. If a software protection key (dongle，软件狗) is supplied in the Experion PKS media box, insert the key into one of USB interface in the computer.2. After installation, Chec
15、k the FTE Device Index & the FTE setting as follows:(1) From Start menu, right click Network or right click the Network icon in notification area of task bar and select Properties.(2) Click Network and Sharing Center.Check the Network Adapter scanning order.(3) Select Manage network connections from the left menu.(4) Right-click one of the FTE network connections (Yellow or Green) and then click Properties.(5) Select Continue to the User Account Control Prompt.(6) Select Honeywell FTE Mux-IM Protocol Driver, and then click Properties.(7) Verify FTE MUX-
