《法国nf阻燃、防火测试标准(中英文)》由会员分享，可在线阅读，更多相关《法国nf阻燃、防火测试标准(中英文)（6页珍藏版）》请在金锄头文库上搜索。
1、法国NF阻燃、防火测试标准NF C20-453：基本环境测试程序.测试方法.烟雾腐蚀性的常规测试NF C20-453：Basic environmental testing procedures. Test methods. Conventional determination of corrosiveness of smoke.NF C20-454：基本环境测试程序.测试方法.火灾特性.气体在高温分解过程中的分析和滴定或电工用材料的燃烧.异常热力或火灾辐照.管式炉法NF C20-454：Basic environmental testing procedures. Test methods.
2、 Fire behaviour. Analysis and titrations of gases evolved during pyrolysis or combustion of materials used in electrotechnics. Exposure to abnormal heat or fire. Tube furnace method.NF C32-070：设备用绝缘电缆和柔性软线.按绝缘电缆和软线耐火性进行分类测试NF C32-070：Insulated cables and flexible cords for installations - Classifica
3、tion tests on cables and cords with respect to their behaviour to fireHalogen Free Control Cable With Numbered Conductors, NF C32-070 C1 is a halogen free multi-conductor, flexible power and control cable designed for use in all electrical equipment in dry, damp and wet conditions. Recommended appli
4、cations include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This cable is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire.NF C32-073：燃烧时电缆的通用测试方法.在
5、规定条件下电缆燃烧时烟密度的测量NF C32-073：Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditionsNF C32-074：火灾情况下电缆的一般测试方法-电缆材料燃烧时产生的气体的测试NF C32-074：Common test methods for cables under fire conditions - Test on gases evolved during combustion
6、of materials from cablesNF C32-310：设备用绝缘电缆和软线-额定电压高达 0.6/1 kV 的耐火(CR1级)电缆和软线NF C32-310：Insulated cables and flexible cords for installation-Fire resistant (class CR1) cables and flexible cords for rated voltage up to and including 0,6/1 kv.NF F16-101：铁路车辆.防火性能.材料的选择NF F16-101：Rolling stock， Fire beh
7、aviour. Materials choosingNF F16-101/NF F16-102法国轨道车辆阻燃防火测试标准根据标准化试验的结果，提出轨道车辆材料分类的方法。此种分类方法使上述目的得以建立，同时又尽可能多地考虑到材料的燃烧以及燃烧散发时材料的不透性和毒性。NF F16-101法国轨道车辆阻燃防火测试标准的目的是根据材料燃烧性及有关对火的反应，不透烟性和气体散发出的毒性，来制定与材料选择有关的标准NF F16-102：铁路车辆-防火性能.电器设备管用材料的选择和应用NF F16-102：Railway rolling stock，Fire behaviour. Materials
8、choosing，application for electric equipments.NF F 16-102 法国轨道车辆阻燃防火测试标准根据标准化试验的结果，提出轨道车辆材料分类的方法。此种分类方法使上述目的得以建立，同时又尽可能多地考虑到材料的燃烧以及燃烧散发时材料的不透性和毒性。NF F 16-102 法国轨道车辆阻燃防火测试标补充说明了电子电器设备在轨道车辆上的应用，轨道车辆-燃烧特点-材料选择，适用于电器设备。NF F16-201：铁路车辆- 座椅防火测试NF F16-201：Railway rolling stock, Fire Resistance test for seat
9、s.NF G 07-128：纺织品.燃烧特性.氧指数的测试NF G 07-128：Textiles.-Behaviour in fire, Determination of the oxygen indexNF G 07-128 or NF T 51-071 standard have been replaced by IEC 60695-2-11/EN ISO 60695-2-11. This standard is used to small size parts of I classification in the oxygen index test. The oxygen index
10、test apply the test oxygen index is 70%、45%、32%、28%NF G 07-180：纺织品-燃烧性能-工作时标准测试方法选择用数据NF G 07-180：Textiles - Fire behaviour. Data for choosing standardized methods of test to be usedNF G 07-182：纺织品-燃烧性能-45度定向样品火焰蔓延特性的测试。NF G 07-182：Textiles - Fire behaviour. Measurement of flame spread properties of
11、 45 degrees oriented specimens. Determination of flame spread rateNF G 07-184：纺织品-燃烧性能-燃烧表面破坏等级的分类方法NF G 07-184：Textiles - Behaviour in fire. Classification method based on the surface destroyedNF G 35-027：铺地纺织品-燃烧性能-常温样品测试NF G 35-027：Textiles -Textile floor coverings- Burning behaviour. Tablet test
12、 at ambient temperatureNF P 92-501：防火安全，建筑材料，防火性能，适用于全部厚度的刚性或刚性复合材料(铺地成品)和厚度大于5mm挠性材料的辐射测试NF P 92-501：Safety against fire - Building materials - Reaction to fire tests - Radiation test used for rigid materials or for materials on rigid substrates (flooring and finishes) of all thicknesses and for fl
13、exible materials thicker that 5 mmNF P 92-501(Epiradiateur辐射器法)是法国用于测定建筑墙板及天花板的阻燃防火性能的方法,主要适用于测定各种厚度的硬质材料和厚度大于5mm的软质材料的阻燃防火等级,法国铁路列车标准NF F 16-101同样采用该测试方法评定列车相关组件的防火阻燃等级.。该方法同时测试材料的释热性和火焰传播情况。对于厚度小于5mm的软质材料，适用NF P 92-503进行评定。NF P 92-503：防火安全，建筑材料，防火性能，挠性材料用电炉测试NF P 92-503：Safety against fire, Buildi
14、ng materials， Reaction to fire tests. Electrical burner test used for flexible materialsElectrical burner test used for flexible materials thickness no more than 5 mm.NF P 92-504：防火安全，建筑材料，防火性能，火焰持续性和蔓延速度测试NF P 92-504：Safety against fire. Building materials. Reaction to fire tests, Flame persistance
15、 test and speed of the spread of flame.NF P 92-504用于测定水平放置的材料火焰传播速率。该方法亦适用于在其它或试验中迅速熔化而不燃烧，或者不能达到M1M3的材料。NF P 92-505：防火安全，建筑材料，防火性能，热熔材料熔滴性能测试NF P 92-505：Safety against fire, Building materials. Reaction to fire tests， Test used for thermalmelting materials. Dripping testNF P 92-505是用于测试建筑材料燃烧时是否产生可
16、点燃棉绒的熔滴。如果在其他火反应试验中材料不燃产生熔滴或者材料快速收缩而无法测定其火焰传播情况,则应进行滴落性试验,根据滴落试验的结果将材料划分为M1M4等级。以上资料由防火资源网（http:/）防火测试中心整理或发布。NF P 92-506：防火安全，建筑材料，防火性能，地面材料辐射板测试NF P 92-506：Safety against fire，Building materials. Reaction to fire tests. Radiant panel test for flooring.NF P 92-507：防火安全-建筑-内部装饰材料-防火性能等级NF P 92-507：Fire saf
