《【7A文】创成式外形设计-Catia官方英文培训教程》由会员分享,可在线阅读,更多相关《【7A文】创成式外形设计-Catia官方英文培训教程(220页珍藏版)》请在金锄头文库上搜索。
1、Copyright DASSAULT SYSTEMES 2002,1,Generative Shape Design,CATIA Training Exercises,Version 5 Release 9 June 2002 EDU-CAT-E-GSD-FX-V5R9,Copyright DASSAULT SYSTEMES 2002,2,Table of Contents (1/3),Master Exercise : the B-Pillar p.6 Creating the Mating Part p.11 Creating the Outer Part p.21 Creating th
2、e Inner Part p.28 Creating the Reinforcement Part p.37 Replacing the Input Styling Data p.45 Wireframe Geometry Recap Exercise p.52 Surface Geometry Recap Exercise p.54 Operation Recap Exercise p.56 Managing Features Recap Exercise p.58 The Mobile Phone p.60 Creating the Wireframe Elements p.65 Crea
3、ting the Surfaces p.71 Performing Operations p.79 Analyzing and Modifying p.85 Offsetting a Solid p.92,Copyright DASSAULT SYSTEMES 2002,3,Table of Contents (2/3),The Knob p.95 Generating the Wireframe p.99 Extruding Basic Surfaces p.104 Performing Operations p.107 Analyzing and Modifying the Draft p
4、.114 Offsetting a Solid p.118 The Plastic Bottle p.120 Creating the Bottom of the Bottle p.124 Creating the Body of the Bottle p.130 Creating the Bottleneck p.135 Assembling the Three Open Bodies p.145 Creating the Bottleneck Screw p.152,Copyright DASSAULT SYSTEMES 2002,4,Table of Contents (3/3),The
5、 Shampoo Bottle p.157 The Space Mouse p.161 Creating the Base Pad and the Upper Fillet p.165 Creating the Surfacic Elements p.169 Sewing the Surface on the Pad p.174 Step 4 to 7 p.177 Creating the Holes and Pockets p.183 Assembling a New Body to the Part Body and Patterning it p.189 The Lemon Squeez
6、er p.193 Completing the Wireframe Geometry p.197 Creating the Basic Surfaces p.204 Creating a Blend Surface with Coupling Points p.209 Creating the Filtering Holes p.216,Copyright DASSAULT SYSTEMES 2002,5,B-Pillar Exercise,Exercise Presentation : B-Pillar B Pillar (1) : Publishing the Styling Inputs
7、 and Creating the Mating Part B Pillar (2) : Creating the Outer Part B Pillar (3) : Creating the Inner Part B Pillar (4) : Creating the Reinforcement Part B Pillar (5) : Replacing the Input Styling Data and Managing the Update Failures,Copyright DASSAULT SYSTEMES 2002,6,Master Exercise,You will prac
8、tice concepts learned throughout the course, by building the master exercise and following the recommended process,Copyright DASSAULT SYSTEMES 2002,7,Exercise,In this exercise you will create a B-Pillar using style input data. You will also learn to manage multi model links and to design surfaces pa
9、rts in the context of an assembly. Finally, you will replace the style input data and you will propagate the style modifications through the assembly. You will also have to manage updates failures.,60 min.,Exercise Presentation : B-Pillar,Copyright DASSAULT SYSTEMES 2002,8,Design Intent : B-Pillar (
10、Links Structure),Styling Input Data : - Datum Features,Mating Part : - Input Data created from the Styling Input Data,The 3 Parts of the B-Pillar : Outer Part Inner Part Reinforcement part,Final Product,Copyright DASSAULT SYSTEMES 2002,9,Design Process : B-Pillar,Creating Inner Part,Creating Reinfor
11、cement Part,3,4,Style Modifications Manage Update Failures,5,Creating Outer Part,2,Publish Input Parts and Create the Mating Part,1,Copyright DASSAULT SYSTEMES 2002,10,Practice in the context of the B-Pillar,Creating Inner Part,Creating Reinforcement Part,3,4,Style Modifications Manage Update Failur
12、es,5,Creating Outer Part,2,Publish Input Parts and Create the Mating Part,1,Copyright DASSAULT SYSTEMES 2002,11,Exercise,In this step you will : Publish the Input Data. Insert the Input Data in a product. Create the Mating Part.,B-Pillar (Step 1) - Publishing the styling inputs and creating the Mati
13、ng Part,10 min.,Copyright DASSAULT SYSTEMES 2002,12,Do It Yourself(1/7) : Publishing the input data,Access the Generative Shape Design Workbench if you are not already in it.,The OpenBody.1 contains the input styling data. You are going to publish these elements,Part used: BPILLAR1_STYLE.CATPart,Cop
14、yright DASSAULT SYSTEMES 2002,13,Do It Yourself(2/7) : Publishing the input data,Publish all the input data :,The publish elements are added in the specification tree.,Copyright DASSAULT SYSTEMES 2002,14,Do It Yourself(3/7) : Inserting the published data in a product,Create a new product. Both the B
15、PILLAR1_STYLE.CATPart and the new product are opened. Tile horizontally your CATIA screen : Double-click on the Product.1 in the product tree to access the infrastructure workbench and drag and drop the Part Style Input into the product :,Copyright DASSAULT SYSTEMES 2002,15,Do It Yourself(4/7) : Cre
16、ating the Mating Part,Insert a new part in the product and rename it Part Mating. Double click on “Part Mating” to access the Generative Shape Design workbench. Copy and paste special as result with link at the part mating level: Now you can hide the Part Style Input and work in the Part Mating with the copied elements.,The copied elements are inserted in the Part Mating inside a new open body called External References,