《诺瓦科技LED控制卡MCTRL4K规格书》由会员分享，可在线阅读，更多相关《诺瓦科技LED控制卡MCTRL4K规格书（9页珍藏版）》请在金锄头文库上搜索。
1、 Specifications Independent Controller MCTRL4K Rev1.0.1 NS1601000126 Overview MCTRL4K is an independent master controller developed by NovaStar with an epoch-making significance. The loading capacity of a single unit is up to 4096x216060Hz, which is able to meet the on-site requirements of oversized
2、 LED displays. MCTRL4K makes it easier to create stunning visual effects for users. MCTRL4K also can be used as two independent master controllers, which makes it more flexible to load LED displays. The design of MCTRL4K is innovative. It allows to configure a display at any time without PC. Various
3、 video inputs such as DP, HDMI, dual-link DVI etc. and outputs of 16-channel Neutrik Gigabit Ethernet ports as well as 4-channel optical fiber ports are supported. Features 1) Complete video input interfaces: DP1.2 x 1, HDMI2.0 x 1, dual-link DVI x 2; 2) Supports 16-channel Neutrik Gigabit Ethernet
4、outputs and 4-channel optical fiber outputs and maximum loading capacity of a single unit up to 4096x216060Hz; 3) Supports two operating modes during dual-link DVI input: mosaic and multi-card; 4) Innovative design to enable smart configuration which has greatly shortened the time for stage preparat
5、ion; 5) NovaStars G4 engine to create stable and flicker-free pictures without scanning lines, and bring smooth images with a good sense of layering; 6) Supports NovaStars latest pixel-by-pixel calibration technology, the process of which is fast and efficient; 7) Enables white balance calibration a
6、nd color gamut mapping based on the different features of LEDs on the display to ensure the real restoration of color; 8) Screen configuration can be done at any time without PC; 9) Manual adjustment of screen brightness, which makes it much easier and quicker; 10) Multiple controllers are able to b
7、e cascaded for uniform control. Dimensions Dimensions of MCTRL4K (mm) Appearance Front panel : Power button Press the button for startup. After startup, press and hold the button for 45 seconds to power off. : USB interface for connecting USB drives only(unable to connect computers) : Operation scre
8、en The top section of the screen displays product name (customizable) and its IP address. The meanings of other sections are described as below: A: Input status of signal source. Blue indicates it has signal while gray indicates no signal. B: Current input source and its resolution, frame rate. For
9、example, the information of two DVI sources will be displayed alternately here when dual-link DVI is selected as input. C: Width, height and frame rate of the screen under configuration; D: Status, the meanings of each status icon are introduced as follows: Supply voltage of mainboard core; Temperat
10、ure inside the controller; Brightness of the LED display; DVI1 and DVI2 sources are not synchronous(in mosaic mode), DVI1 and DVI2 sources are synchronous(in mosaic mode); Control interface is not connected; USB port is used as control interface; Ethernet port is used as control interface; Operation
11、 screen is not locked; Operation screen is locked. NOVASTAR TECH CO.,LTD.E: Connection status of Ethernet ports. Blue indicates that the connection is available and the port works as master control while gray indicates the port is not connected or the connection is unavailable. Mark on the upper lef
12、t corner of the icon indicates that the connection is available and the port is in redundancy state. F: Connection status of optical fiber ports. Blue indicates that the connection is available and the fiber port works as master control while gray indicates the port is not connected or the connectio
13、n is unavailable. Mark on the upper left corner of the icon indicates that the connection is available and the port is in redundancy state. : Knob, Pressing the knob indicates Enter or OK, rotating the knob allows us to select or adjust. : BACK: Back to the previous menu. Rear panel Inputs DP 1.2 DP
14、 1.2 interface supports HDCP 1.3 HDMI 2.0 and HDCP 2.2HDMI 2.0 interface supports HDCP 1.4 DUAL DVI-D1/D2 Dual-link DVI interface Outputs 116 16-channel Neutrik Gigabit Ethernet outputs OPT14 4-channel optical fiber outputs Control ETHERNET TAR Control interface USB IN: cascade input or connecting to PC for communication OUT: cascading next unit GenLock IN Genlock type: Blackburst Genlock synchronous signal, making sure the pictures on LED display are synchronous with external Genlock source. LOOP Genlock loop output Power supply AC 100-240V50/60HZ AC p
