《使用solidworksmotion进行运动分析的简介，学员手册》由会员分享，可在线阅读，更多相关《使用solidworksmotion进行运动分析的简介，学员手册（18页珍藏版）》请在金锄头文库上搜索。
1、工程设计 和技术系列使用使用 SolidWorks Motion 进行运动 分析的简介， 学员手册进行运动 分析的简介， 学员手册SolidWorks Corporation 300 Baker Avenue Concord, Massachusetts 01742 USA 电话：+1-800-693-9000美国之外的地区：+1-978-371-5011 传真：+1-978-371-7303 电子邮件： 网址：http:/ 1995-2010, Dassault Systmes SolidWorks Corporation, a Dassault Systmes S.A. company,
2、300 Baker Avenue, Concord, Mass. 01742 USA. All Rights Reserved.The information and the software discussed in this document are subject to change without notice and are not commitments by Dassault Systmes SolidWorks Corporation (DS SolidWorks).No material may be reproduced or transmitted in any form
3、 or by any means, electronic or mechanical, for any purpose without the express written permission of DS SolidWorks.The software discussed in this document is furnished under a license and may be used or copied only in accordance with the terms of this license. All warranties given by DS SolidWorks
4、as to the software and documentation are set forth in the SolidWorks Corporation License and Subscription Service Agreement, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modifica- tion or amendment of such warranties.Patent Notices for SolidWork
5、s Standard, Premium, Educational, and Professional Products U.S. Patents 5,815,154; 6,219,049; 6,219,055; 6,603,486; 6,611,725; 6,844,877; 6,898,560; 6,906,712; 7,079,990; 7,184,044; 7,477,262; 7,502,027; 7,558,705; 7,571,079; 7,590,497; 7,643,027; 7,672,822; 7,688,318; 7,694,238, and foreign patent
6、s, (e.g., EP 1,116,190 and JP 3,517,643). U.S. and foreign patents pending.Trademarks and Other Notices for All SolidWorks Products SolidWorks, 3D PartStream.NET, 3D ContentCentral, PDMWorks, eDrawings, and the eDrawings logo are registered trademarks and FeatureManager is a jointly owned registered
7、 trademark of DS SolidWorks. SolidWorks Enterprise PDM, SolidWorks Simulation, SolidWorks Flow Simulation, and SolidWorks 2010 are product names of DS SolidWorks.CircuitWorks, Feature Palette, FloXpress, PhotoWorks, TolAnalyst, and XchangeWorks are trademarks of DS SolidWorks.FeatureWorks is a regis
8、tered trademark of Geometric Ltd.Other brand or product names are trademarks or registered trademarks of their respective holders.COMMERCIAL COMPUTER SOFTWARE - PROPRIETARY U.S. Government Restricted Rights. Use, duplication, or disclosure by the government is subject to restrictions as set forth in
9、 FAR 52.227-19 (Commercial Computer Software - Restricted Rights), DFARS 227.7202 (Commercial Computer Software and Commercial Computer Software Documentation), and in the license agreement, as applicable.Contractor/Manufacturer: Dassault Systmes SolidWorks Corporation, 300 Baker Avenue, Concord, Ma
10、ssachusetts 01742 USACopyright Notices for SolidWorks Standard, Premium, Educational, and Professional Products Portions of this software 1990-2010 Siemens Product Lifecycle Management Software III (GB) Ltd. Portions of this software 1998-2010 Geometric Ltd.Portions of this software 1986-2010 mental
11、 images GmbH 5,943,063; 6,289,364; 6,563,502; 6,639,593; 6,754,382; Patents Pending.Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, Distiller and Reader are registered trademarks or trademarks of Adobe Systems Inc. in the U.S. and other countries.For more copyright information, in SolidWorks see
12、 Help About SolidWorks.Other portions of SolidWorks 2010 are licensed from DS SolidWorks licensors.Copyright Notices for SolidWorks SimulationPortions of this software 2008 Solversoft Corporation.PCGLSS 1992-2007 Computational Applications and System Integration, Inc. All rights reserved.Portions of
13、 this product are distributed under license from DC Micro Development, Copyright 1994-2005 DC Micro Development, Inc. All rights reserved.SolidWorks Motion Simulation 学员手册学员手册1i简介简介关于此课程关于此课程使用 SolidWorks Motion 进行运动分析的简介及其辅助资料旨在帮助您在教学环境 下学习 SolidWorks Motion Simulation。此课程提供了一种旨在提高能力的方法，帮 助学生学习刚体运动
14、和动力的相关概念。联机教程联机教程使用 SolidWorks Motion 进行运动分析的简介是一种 配套资源，SolidWorks Motion 联机教程是对它的有 力补充。访问教程访问教程要启动联机教程，请依次单击帮助、帮助、SolidWorks 教 程、所有教 程、所有 SolidWorks 教程教程。系统会调整 SolidWorks 窗口的大小并在它的旁边显示另一个窗口，在当中 列出可用教程。将鼠标指针移到链接上时，该窗口 的底部会显示相应的教程图示。单击所需的链接即 可启动相应的教程。惯例惯例为了优化教程的显示效果，请将屏幕分辨率设置为 1280x1024。教程中会出现以下图标：移到
15、教程中的下一个屏幕。表示注释或提示。它并非链接，其说明信息位于 图标右侧。注释与提示提供了节省时间的操 作步骤和实用启示。您可以单击课程中出现的大多数工具栏按钮以显 示相应的 SolidWorks 按钮。首次单击这些按 钮时，会显示一条有关 ActiveX 控件的消息： 在此页上的 ActiveX 控件和本页上的其它部份的交互可能不安全。您想允 许这种交互吗？这只是一种标准的预防措施。联机教程中的 ActiveX 控件并 不会危害您的系统。单击否否可禁用该主题的脚本。单击是是则运行脚本并显示 按钮。SolidWorks 简介 工程设计和技术系列简介 工程设计和技术系列SolidWorks Mo
16、tion Simulation 学员手册学员手册2打开文件打开文件或设置此选项设置此选项会自动打开文件或者设置选项。视频示范视频示范会显示该步骤的相关视频。深入了解深入了解 . 会链接到与某一主题相关的更多信息。尽管对完成教程的学习而言并 非必要，但它可有助您了解某个主题的详细信息。为什么为什么 . 会链接到某个操作过程的相关详细信息以及需要采用某种方法的原因。 这些信息并不是完成教程所必需的。打印教程打印教程如果需要，您可以按照下面的步骤打印联机教程：1在教程的导航工具栏上，单击显示显示 。联机教程的目录随即出现。2右击您想打印的课程所对应的书状图标，然后从快捷菜单中选择打印打印。 此时会显示打印主题打印主题对话框。3选择打印所选的标题和所有副标题打印所选的标题和所有副标题，然后单击确定确定。4对要打印的每个课程重复此过程。SolidWorks Simulation 产品线产品线虽然此课程会集中介绍如
