基于单片机辅锅炉半实物信号模拟与采集系统的开发和研究毕业论文

上传人:Bod****ee 文档编号:47208815 上传时间:2018-06-30 格式:DOC 页数:31 大小:889.04KB
返回 下载 相关 举报
基于单片机辅锅炉半实物信号模拟与采集系统的开发和研究毕业论文_第1页
第1页 / 共31页
基于单片机辅锅炉半实物信号模拟与采集系统的开发和研究毕业论文_第2页
第2页 / 共31页
基于单片机辅锅炉半实物信号模拟与采集系统的开发和研究毕业论文_第3页
第3页 / 共31页
基于单片机辅锅炉半实物信号模拟与采集系统的开发和研究毕业论文_第4页
第4页 / 共31页
基于单片机辅锅炉半实物信号模拟与采集系统的开发和研究毕业论文_第5页
第5页 / 共31页
点击查看更多>>
资源描述

《基于单片机辅锅炉半实物信号模拟与采集系统的开发和研究毕业论文》由会员分享,可在线阅读,更多相关《基于单片机辅锅炉半实物信号模拟与采集系统的开发和研究毕业论文(31页珍藏版)》请在金锄头文库上搜索。

1、 毕业论文(设计)基于单片机辅锅炉半实物信号模拟与采集系统开发研究Study on Simulation and Hardware-in-the-loop Signal Acquisition System Based on MCU Development of Auxiliary Boiler摘 要本文主要设计了一种基于单片机的船舶辅锅炉液位检测系统,它以单片机作为核心控制器,通过单片机和模数转换器,数码管显示等硬件系统和软件设计方法实现具有液位检测的功能.本系统在设计中主要模拟对船舶锅炉水位检测来实现液位控制。主要用液位传感器检测液位,用 LED 显示器来完成显示部分,通过模数转换把这些信

2、号送入单片机中。把这些信号与单片机中内部设定的值相比,以判断单片机是否需要进行相应的操作,即是否需要开启水泵,来实现对液位的控制,从而实现单片机自动控制液位的目的。本设计用单片机控制易于实现锅炉液位的控制,而且有造价低、程序易于调试、一部分出现故障不会影响其他部分的工作、维修方便等优点。关键词:单片机,船舶辅锅炉,液位检测ABSTRACTDesigned in this paper is an auxiliary boiler liquid level control system, which a controller, through hardware and software desig

3、n ,such single chip and ADC, a system of digital display, reach to liquid level detection. The design of the system are mainly include the water level detection, such as a few parts to achieve the level control. Detection of the main level with the water level sensors, with LED display to complete t

4、he display, Through analog-to-digital conversion take these signals into the single chip. These single-chip signal and the internal set of values compared to determine the need for the corresponding single-chip operation, namely, the need to open the pump to achieve the level of control, thus in ord

5、er to achieve the purpose of automatic control by single-chip solution. The design is easy to implement single-chip boiler liquid level control and its low cost and easy to debug the procedure, part of the failure will not affect other parts of the work, maintenance convenience, and so on.KEY WORDS:

6、 Single chip microcomputer, auxiliary bolier, liquid level detection目 录摘 要.Abstract.第一章 绪论.11.1 船舶辅锅炉系统简介.11.2 单片机在国内外发展概况.11.3 半实物仿真技术的应用.21.4 本课题研究目的及意义.2 第二章 主要芯片介绍.42.1 单片机 STC89C52 介绍.42.2 芯片 74LS74 介绍.72.3 模数转换器 A/D0809.92.4 LED 数码管显示.11第三章 锅炉液位控制的硬件设计.133.1 系统硬件设计的总体方案及框图.133.2 显示电路的设计.133.3 复位电路的设计.143.4 感应电路的设计.15第四章 软件设计及试验运行结果.174.1 系统的软件设计.174.2 试验调试及运行结果.17结 论.20致 谢.21参考文献.22附录一 设计程序清单.23附录二 电路原理图.25附录三 硬件实物图.26第一章 绪论1.1 船舶辅锅炉系统简介船舶辅锅炉是船舶重要的设备之一。在柴油机动力装置的船舶上,它主要是通过产生

展开阅读全文
相关资源
正为您匹配相似的精品文档
相关搜索

最新文档


当前位置:首页 > 学术论文 > 毕业论文

电脑版 |金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号