《f09fautorisationpourservicederéparation-étalonnage》由会员分享,可在线阅读,更多相关《f09fautorisationpourservicederéparation-étalonnage(2页珍藏版)》请在金锄头文库上搜索。
1、1440, Hymus Blvd., Dorval (Quebec) H9P 1J6 T. (514) 684-7474 F. (514) 684-5352 81c4680e8520f42cf22c6dc2f1b857bb.pdf1/2(2009-03-27) Revision 7PIPETTE REPAIR / CALIBRATION SERVICE AUTHORIZATION FORMYour Order # Company Name / Organization:Contact Name :Street Address : Room : City : Telephone : ( ) Ex
2、t : Province : Fax : ( ) Postal Code : E-mail : Billing Address, If DifferentAddress : City : Province : Postal Code : Return Shipment MethodYour service : Account Number : Our service Costs vary according to weight and destination; from 10$ to 20$ for the Montreal regionCalibration interval needed
3、: Estimation : Yes No Number of pipettes shippedSingle channel Multi-channel Declaration of Decontamination: We certify that these instruments have been carefully cleaned and decontaminated and pose no danger through bacteriological, virological, chemical or radioactive contamination. We are aware t
4、hat we may be held liable for any damage caused by contaminated instruments.Signature : Date : Special requests : Important: So that we can proceed with the repair or calibration work, the Pipette Repair / Calibration Authorization Form must be completely filled out and send with the instrument(s).*
5、 Additional copies of this document available upon request or from our website, *1440, Hymus Blvd., Dorval (Quebec) H9P 1J6 T. (514) 684-7474 F. (514) 684-5352 81c4680e8520f42cf22c6dc2f1b857bb.pdf2/2(2009-03-27) Revision 7Standard Pipette Calibration ServicesASTM-E1154 89 Quick Check Service IThis p
6、rocedure includes the dismantling, cleaning, re-assembling and calibration of the pipette. It also includes a detailed calibration certificate, using 3 different volumes weighed 4 times. (Total of 12 tests per channel). Costs: Simple: 33.00$ Multi: 90.00$ ASTM-E1154-89 Quick Check Service IISame as
7、service I, however, no calibration certificate is issued.Costs: Simple: 28.00$ Multi: 75.00$ ISO 8655-6This procedure follows the ISO 8655 standard used for pipette calibration. It is often chosen by clients needing GLP, ISO 9000 or other quality assurance compliances. It includes the dismantling, c
8、leaning, re-assembling and calibration of the pipette. It also includes a detailed calibration certificate using 3 different volumes weighed 10 times. (Total of 30 tests per channel).Costs:Simple: 55.00$ Multi: 150.00$ Pipette Calibration Services According To ISO 17025:2005As found / As returnedThi
9、s procedure complies with the ISO 17025:2005 standard, requiring the testing of pipettes before any work is done to them. It acklowledges the condition of the pipettes upon reception. This is an option for clients needing a more strict compliance guideline. The same number of tests done at reception
10、 and after the dismantling, cleaning and re-assembling will be performed according to the standard ISO 8655 6. A calibration certificate is issued, mentioning both tests results, upon reception and after calibration.Costs: ISO 8655 6 Simple: 65.50$ Multi: 225.00$ Pipette Verification ServicesVerific
11、ation ServiceVerification of the pipette only, without dismantling for cleaning, Including Calibration Certificateaccording to the selected standard:Costs: ASTM E1154-89 Service I Simple: 15.00$ Multi: 45.00$ ISO 8655 6 Simple: 25.00$ Multi: 115.00$ If found non-conforming, calibrate according to se
12、lected standard *Verification Service Verification of the pipette only, without dismantling for cleaning. Without Calibration Certificate Costs: Simple: 13.00$ Multi: 25.00$ If found non-conforming, calibrate according to ASTM E1154-89 Service II * * A 15% discount applies to the calibration services only.All parts replaced will be billed.Pipette Maintenance ContractA maintenance contract is available for 100 pipettes and more. Please contact us for more information.