《毕业设计（论文）：基于单片机的简易触摸屏手机》由会员分享，可在线阅读，更多相关《毕业设计（论文）：基于单片机的简易触摸屏手机（54页珍藏版）》请在金锄头文库上搜索。
1、摘 要本系统是一个基于单片机的简易触摸屏手机。最近几年，手机的发展日新月异，特别是 android 操作系统和触摸屏的便捷性，使触摸屏手机迅速普及，触摸屏手机将是未来手机的主流配置，此系统就是研究触摸屏手机的工作原理及实现方法。整个系统主要是由 STC12C5A60S2 单片机，SIM300 模块，串口触摸屏及一些外围器件组成的，主要功能的实现方法是：先用触摸屏配套 PC 组态软件和 PS 软件提前设置好触摸屏的图标和数字键盘等主要显示界面，然后下载到触摸屏的内部存储器中，供触摸屏内部处理；当按下相应的触摸按键后，把触摸屏的内部处理后的数据通过单片机的串口 1 发送给单片机，之后单片机进行相应
2、的运算处理和判断，再通过单片机的串口 2 给 SIM300 模块发送相应的 AT 操作指令，驱动 SIM300 模块发送对应的手机信号。通过以上模块，可以实现：接、打电话，接、发英文短信，有来电提醒功能，以及实时时钟的功能。关键词关键词：手机；SIM300 模块；串口触摸屏；实时时钟ABSTRACTThis system is a simple microcontroller-based touch screen phone. In recent years, development of mobile phones is very fast. Especially because the a
3、ndroid operating system and touch screen is very convenient, touch screen mobile phone is more and more popular. Touch screen mobile phones will be the most mainstream configuration in the future.The whole system is mainly composed by STC12C5A60S2 microcontroller,Sim300 module, serial touch screen,
4、and some peripheral devices. The realization method of the main function is: firstly use a touch screen supporting PC configuration software and PS software, set touch screen icon and numeric keypad and other display interface in advance. Then download to the internal memory of the touch screen ,let
5、 internal touch screen process;If the corresponding touch button is pressed,sent the data of processed by the touch screen to the microcontroller via a serial microcontroller,Then the microcontroller executes the corresponding arithmetic processing and judgment. Then the controller send the appropri
6、ate AT command to SIM300 module through the serial 2.And Drive the SIM300 module sending mobile phone signal. The system also adds a 1302 clock chip, time can be displayed in real time. Through the above module, this system achieves: receive, make a phone call; Receive, send English text messages. T
7、here is an incoming call reminders, and perpetual calendar. Also it can set the alarm clock.Key Words: mobile phone; SIM300 module; serial touch screen; perpetual calendarI目 录1 引言.11.1 课题研究的背景.11.2 课题研究的目的及意义.11.3 课题研究设想.22 系统方案研究.32.1 方案论证.32.1.1 主控芯片选择.32.1.2 GSM 模块选择.32.1.3 触摸屏模块选择.42.1.4 时钟模块选择.
8、42.2 方案最终选定及系统原理框图.43 硬件电路设计.63.1 STC12C5A60S2 主控单片机介绍.63.1.1 单片机的主要特性.63.1.2 单片机引脚说明.73.1.3 串行口功能介绍.83.1.4 STC12C5A60S2 单片机最小系统.83.2 SIM300 模块.93.2.1 SIM300 功能简介.93.2.2 SIM300 电路原理.93.2.3 SIM300 串口调试简介.103.3 触摸屏模块.133.3.1 串口触摸屏简介.133.3.2 触摸屏使用方法.143.4 RTC 实时时钟.15II3.4.1 时钟功能简介.154 软件设计.164.1 Keil 软件介绍.164.2 编程总结.
