《rrc系统消息结构》由会员分享，可在线阅读，更多相关《rrc系统消息结构（23页珍藏版）》请在金锄头文库上搜索。
1、10.2.48.8System Information BlocksThe IE “SIB data“ within the IEs, “First Segment“, “Subsequent or last Segment“ and “Complete SIB“ contains either complete system information block or a segment of a system information block. The actual system information blocks are defined in the following clauses
2、.10.2.48.8.1Master Information BlockInformation Element/Group nameNeedMultiType and referenceSemantics descriptionVersionOther information elements MIB Value tagMPMIB Value tag 10.3.8.9 CN information elements Supported PLMN typesMPPLMN Type 10.3.1.12 PLMN IdentityCV-GSMPLMN Identity 10.3.1.11 Multi
3、ple PLMN ListOPMultiple PLMN List 10.3.1.7aIf present, this IE specifies the PLMNs of the cell. If absent, the IE “PLMN Identity” specifies the PLMN of the cell.REL-6ANSI-41 information elements ANSI-41 Core Network InformationCV-ANSI- 41ANSI-41 Core Network Information 10.3.9.1 References to other
4、system information blocks and scheduling blocksMPReferences to other system information blocks and scheduling blocks 10.3.8.14 CSG IndicatorOPEnumerated (TRUE)If present, the cell is a CSG cell (see 4). If absent, the cell is not a CSG cell.REL-8ConditionExplanation GSMThe IE is mandatory present if
5、 the IE “Supported PLMN Types“ is set to GSM-MAP or GSM-MAP AND ANSI-41, and not needed otherwise ANSI-41The IE is mandatory present if the IE “Supported PLMN Types“ is set to ANSI-41 or GSM-MAP AND ANSI-41, and not needed otherwise10.2.48.8.2Scheduling Block 1Information Element/Group nameNeedMulti
6、Type and referenceSemantics descriptionReferences to other system information blocksMPReferences to other system information blocks 10.3.8.1310.2.48.8.3Scheduling Block 2Information Element/Group nameNeedMultiType and referenceSemantics descriptionReferences to other system information blocksMPRefer
7、ences to other system information blocks 10.3.8.1310.2.48.8.4System Information Block type 1The system information block type 1 contains NAS system information as well as UE timers and counters to be used in idle mode and in connected mode.Information Element/Group nameNeedMultiType and referenceSem
8、antics descriptionCN information elements CN common GSM-MAP NAS system informationMPNAS system information (GSM-MAP) 10.3.1.9 CN domain system information listMP1 to Send CN information for each CN domain.CN domain system informationMPCN domain system information 10.3.1.2 UE information UE Timers an
9、d constants in idle modeMDUE Timers and constants in idle mode 10.3.3.44The UE behaviour is unspecified if this IE is absent.UE Timers and constants in connected modeMDUE Timers and constants in connected mode 10.3.3.43Default value means that for all timers and constants - For parameters with need
10、MD, the defaults specified in 10.3.3.43 apply and - For parameters with need OP, the parameters are absent10.2.48.8.5System Information Block type 2The system information block type 2 contains the URA identity.Information Element/Group nameNeedMultiType and referenceSemantics descriptionUTRAN mobili
11、ty information elements URA identity listMP1 . URA identityMPURA identity 10.3.2.610.2.48.8.6System Information Block type 3The system information block type 3 contains parameters for cell selection and re-selection.Information Element/Group nameNeedMultiType and referenceSemantics descriptionVersio
12、nSIB4 IndicatorMPBooleanTRUE indicates that SIB4 is broadcast in the cell. When the UE receives SIB3 in the System Information Container message, this IE is interpreted as FALSE. UTRAN mobility information elements Cell identityMPCell identity 10.3.2.2 Cell selection and re-selection infoMPCell sele
13、ction and re- selection info for SIB3/4 10.3.2.3 Cell Access RestrictionMPCell Access Restriction 10.3.2.1 Domain Specific Access Restriction Parameters For PLMN Of MIBOPDomain Specific Access Restriction Parameters 10.3.1.3cThis IE specifies the Domain Specific Access Restriction Parameters for UEs
14、 which has chosen the PLMN in the IE “PLMN identity” of the Master Information Block. If the cell is operating in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified.REL-6Domain Specific Access Restriction For Shared NetworkOPIf the cell is operat
15、ing in MBSFN mode as indicated in subclause 8.1.1.6.3 the UE behaviour upon reception of this IE is unspecified.REL-6CHOICE barring representationMPREL-6 Domain Specific Access Restriction ListREL-6Domain Specific Access Restriction Parameters For Operator1OPDomain Specific Access Restriction Parame
16、ters 10.3.1.3cThis IE specifies the Domain Specific Access Restriction Parameters for UEs which has chosen the first PLMN in the IE “multiplePLMNs” in the IE “Multiple PLMN List” of the Master Information Block.REL-6Domain Specific Access Restriction Parameters For Operator2OPDomain Specific Access Restriction Parameters 10.3.1.3cThis I
