retmaster

上传人:繁星 文档编号:45644487 上传时间:2018-06-18 格式:PDF 页数:22 大小:924.14KB
返回 下载 相关 举报
retmaster_第1页
第1页 / 共22页
retmaster_第2页
第2页 / 共22页
retmaster_第3页
第3页 / 共22页
retmaster_第4页
第4页 / 共22页
retmaster_第5页
第5页 / 共22页
点击查看更多>>
资源描述

《retmaster》由会员分享,可在线阅读,更多相关《retmaster(22页珍藏版)》请在金锄头文库上搜索。

1、 2016 CommScope, Inc. All rights reserved. Visit our website at or contact your local CommScope representative or BusinessPartner for more information. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope, Inc. 653515 D (05/16) Page 1 of 22 RET Master

2、 Operations Manual 653515 Revision D, May 2016 653515 2016 CommScope, Inc. All rights reserved. Visit our website at or contact your local CommScope representative or BusinessPartner for more information. All trademarks identified by or are registered trademarks or trademarks, respectively, of Com

3、mScope, Inc. 653515 D (05/16) Page 2 of 22 WARRANTY NOTICE Proper installation procedures must be followed when installing and operating RET equipment. Failure to assure installations are done properly by trained installation personnel and to follow procedures discussed in this bulletin may cause wa

4、rranty for such products to be void. CommScope requires pre-testing actuators on the ground prior to installation using the CommScope portable controller and the latest version of the controller software. This will verify proper actuator functionality and also ensure that the latest available actuat

5、or firmware release is installed on the actuator. Failure to conduct pre-test and pre-installation procedures defined by CommScope will void warranty. SAFETY NOTICE The installation, maintenance, or removal of an antenna requires qualified, experienced personnel. CommScope installation instructions

6、are written for such installation personnel. Antenna systems should be inspected once a year by qualified personnel to verify proper installation, maintenance, and condition of equipment. CommScope disclaims any liability or responsibility for the results of improper or unsafe installation practices

7、. It is recommended that transmit power be turned off when the field installation is performed. Follow all applicable safety precautions as shown on this page Do not install near power lines. Power lines, telephone lines, and guy wires look the same. Assume any wire or line can electrocute you. Do n

8、ot install on a wet or windy day or when lightning or thunder is in the area. Do not use metal ladder. Wear shoes with rubber soles and heels. Wear protective clothing including a long-sleeved shirt and rubber gloves Notices and Precautions GENERAL INSTRUCTIONS It is recommended to turn off the tran

9、smit power when working around an installed antenna. RET connections are weather resistant and must not be weatherproofed. It is required to connect the RET antenna system to the controller and to test it ON THE GROUND before installing the antenna. Register online at to receive e-mail announcement

10、s for software updates. Please contact the CommScope Customer Support Center (see bottom of cover page) for any questions. 653515 2016 CommScope, Inc. All rights reserved. Visit our website at or contact your local CommScope representative or BusinessPartner for more information. All trademarks id

11、entified by or are registered trademarks or trademarks, respectively, of CommScope, Inc. 653515 D (05/16) Page 3 of 22 Table of Contents 1 Getting Started . 8 1.1 System Description . 8 1.2 Package Contents . 8 1.3 Front View . 8 1.4 Back View . 9 2 Setup . 10 2.1 Configuring the RET Master Wi-Fi Settings . 10 2.2 Supported Mobile Devices . 10 2.3 Downloading the CommScope RET Master App . 10 2.4 Connecting to the RET Master Unit . 10 2.5 Updating the RET Master Unit Software. 10 2.6 Power Considerations .

展开阅读全文
相关资源
相关搜索

当前位置:首页 > 办公文档 > 总结/报告

电脑版 |金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号