《cad原始键盘》由会员分享，可在线阅读，更多相关《cad原始键盘（15页珍藏版）》请在金锄头文库上搜索。
1、CADCAD 原始键盘原始键盘; ; ; Program Parameters File For AutoCAD 2006; External Command and Command Alias Definitions; Copyright (C) 1997-2005 by Autodesk, Inc. All Rights Reserved.; Each time you open a new or existing drawing, AutoCAD searches ; the support path and reads the first acad.pgp file that it f
2、inds.; - External Commands -; While AutoCAD is running, you can invoke other programs or utilities; such Windows system commands, utilities, and applications.; You define external commands by specifying a command name to be used; from the AutoCAD command prompt and an executable command string ; tha
3、t is passed to the operating system. ; - Command Aliases -; The Command Aliases section of this file provides default settings for; AutoCAD command shortcuts. Note: It is not recommended that you directly; modify this section of the PGP file., as any changes you make to this section of the ; file wi
4、ll not migrate successfully if you upgrade your AutoCAD to a; newer version. Instead, make changes to the new ; User Defined Command Aliases; section towards the end of this file.; - User Defined Command Aliases -; You can abbreviate frequently used AutoCAD commands by defining ; aliases for them in
5、 the User Defined Command Aliases section of acad.pgp.; You can create a command alias for any AutoCAD command,; device driver command, or external command.; Recommendation: back up this file before editing it. To ensure that; any changes you make to PGP settings can successfully be migrated; when y
6、ou upgrade to the next version of AutoCAD, it is suggested that; you make any changes to the default settings in the User Defined Command ; Aliases section at the end of this file.; External command format:; ,*,; The bits of the bit flag have the following meanings:; Bit 1: if set, dont wait for the
7、 application to finish; Bit 2: if set, run the application minimized; Bit 4: if set, run the application “hidden“; Bit 8: if set, put the argument string in quotes; Fill the “bit flag“ field with the sum of the desired bits.; Bits 2 and 4 are mutually exclusive; if both are specified, only ; the 2 b
8、it is used. The most useful values are likely to be 0 ; (start the application and wait for it to finish), 1 (start the ; application and dont wait), 3 (minimize and dont wait), and 5 ; (hide and dont wait). Values of 2 and 4 should normally be avoided, ; as they make AutoCAD unavailable until the a
9、pplication has completed.; Bit 8 allows commands like DEL to work properly with filenames that ; have spaces such as “long filename.dwg“. Note that this will interfere ; with passing space delimited lists of file names to these same commands.; If you prefer multiplefile support to using long file na
10、mes, turn off ; the “8“ bit in those commands.; Examples of external commands for command windowsCATALOG, DIR /W, 8,指定文件: ,DEL, DEL, 8,要删除的文件: ,DIR, DIR, 8,指定文件: ,EDIT, START EDIT, 9,要编辑的文件: ,SH, , 1,*操作系统命令: ,SHELL, , 1,*操作系统命令: ,START, START, 1,*要启动的应用程序: ,TYPE, TYPE, 8,要列出的文件: ,; Examples of exte
11、rnal commands for Windows; See also the (STARTAPP) AutoLISP function for an alternative method.EXPLORER, START EXPLORER, 1,NOTEPAD, START NOTEPAD, 1,*要编辑的文件: ,PBRUSH, START PBRUSH, 1,; Command alias format:; ,*; The following are guidelines for creating new command aliases.; 1. An alias should reduc
12、e a command by at least two characters. ; Commands with a control key equivalent, status bar button, ; or function key do not require a command alias. ; Examples: Control N, O, P, and S for New, Open, Print, Save.; 2. Try the first character of the command, then try the first two, ; then the first t
13、hree.; 3. Once an alias is defined, add suffixes for related aliases: ; Examples: R for Redraw, RA for Redrawall, L for Line, LT for ; Linetype.; 4. Use a hyphen to differentiate between command line and dialog ; box commands.; Example: B for Block, -B for -Block.; Exceptions to the rules include AA
14、 for Area, T for Mtext, X for Explode.; - Sample aliases for AutoCAD commands - ; These examples include most frequently used commands. NOTE: It is recommended ; that you not make any changes to this section of the PGP file to ensure the ; proper migration of your customizations when you upgrade to
15、the next version of ; AutoCAD. The aliases listed in this section are repeated in the User Custom; Settings section at the end of this file, which can safely be edited while; ensuring your changes will successfully migrate.3A, *3DARRAY3DO, *3DORBIT3F, *3DFACE3P, *3DPOLYA, *ARCAC, *BACTIONADC, *ADCENTERAA, *AREAAL, *ALIGNAP, *APPLOADAR, *ARRAY-AR, *-ARRAYATT, *ATTDEF-ATT, *-ATTDEFATE, *ATTEDIT-ATE, *-ATTEDITATTE,
