高速钢磨削再生过程中有价金属钨及杂质p变化行为

上传人:腾**** 文档编号:40504811 上传时间:2018-05-26 格式:DOC 页数:39 大小:1,021.37KB
返回 下载 相关 举报
高速钢磨削再生过程中有价金属钨及杂质p变化行为_第1页
第1页 / 共39页
高速钢磨削再生过程中有价金属钨及杂质p变化行为_第2页
第2页 / 共39页
高速钢磨削再生过程中有价金属钨及杂质p变化行为_第3页
第3页 / 共39页
高速钢磨削再生过程中有价金属钨及杂质p变化行为_第4页
第4页 / 共39页
高速钢磨削再生过程中有价金属钨及杂质p变化行为_第5页
第5页 / 共39页
点击查看更多>>
资源描述

《高速钢磨削再生过程中有价金属钨及杂质p变化行为》由会员分享,可在线阅读,更多相关《高速钢磨削再生过程中有价金属钨及杂质p变化行为(39页珍藏版)》请在金锄头文库上搜索。

1、毕业论文高速钢磨屑再生过程中高速钢磨屑再生过程中 有价金属钨及杂质磷的变化行为探讨有价金属钨及杂质磷的变化行为探讨本科生毕业论文 中文摘要I摘 要钨是我国在世界上具有优势地位的稀缺资源。我国的有色金属储量不均,贫矿多富矿少。同时,我国对废钨资源的利用也很低,如果我国的废钨的利用率能提高 10%,每年就可以少消耗我国 1.4 万吨钨储量。众所周知,高速钢磨屑中含有大量的钨,具有很高的回收利用价值,所以对高速钢磨屑中废钨的利用应予重视。论文在热力学分析的基础上,经过对国内外高速钢磨屑回收技术的分析比较后,拟定采用硅热法回收高速钢磨屑中的有价金属钨。通过采用冶金强化的方法回收高速钢磨屑中的有价金属钨

2、,初步探索不同条件下高速钢磨屑中钨及杂质磷的变化行为规律。论文还对高速钢磨屑进行磁选除杂与不磁选除杂进行了对比,探讨硅的加入量、石灰用量、萤石用量、单位炉料热效应等条件参数变化因素对钨的回收率及杂质磷的变化影响,确定了回收高速钢磨屑中有价金属钨的最佳条件。通过试验研究表明:采用硅热法工艺回收高速钢磨屑中的钨是可行的,钨的回收率在 80以上。同时,试验还表明高速钢磨屑中铬的回收率大于 45,钼的回收率不低于 85。通过试验研究,表明硅热法回收工艺具有明显的经济效益和社会效益,是一种可行的回收高速钢磨屑中有价金属钨的方法。关键词:高速钢 磨屑 再生利用 钨的变化行为本科生毕业论文 英文摘要ABST

3、RACTThe tungsten is an our country be having the advantage position in the world , and its a rare resources. The non-ferrous metallurgrys reserves of our country is odds. Poor mine is more, and rich mine is lack. At the same time, the use of the depose tungsten in our country also quite low. If the

4、use of the depose tungsten improve 10%, it will reduce 1.4 ten thousands tungsten mine of our country. The high-speed steel bits have a mass of tungsten, so it has very supermal reclaim using value. So that we must regard the depose tungsten of the high-speed steel.On the basis of thermodynamic anal

5、ysis,the discourse course by comparing reclaim technique of inside and outside country, plan get across Siliconthermal process for recovering W metal in the form of secondary alloy from scale of highspeed steel. Search after the W and Ps ransformation conducts of Highspeed steel on the different con

6、ducts. The effects of lime,reducing reagent and unit therm al on metal recoveries were analyzed. Make sure the best condition for reclaiming Secondary alloy form highspeed steel.The results show that the technical is practicable. The recover ratio of W is more than 80 percent,the ratio of Cr is over

7、 45 percent,the ratio of V is about 85 percentThe quality of product is stable and the product can meet the need of steelmakingThe waste of to grinding dust is full of used and remarkable social economic benefites are chived.Keywords: high-speed steel; Scale; Secondary utilization; ransformation con

8、duct本科生毕业论文 目录目 录中文摘要.I英文摘要.II1 绪 论.11.1 有价金属钨的简介.11.1.1 钨的性质.11.1.2 钨的分布.11.1.3 钨在钢中的作用.11.2 磷的简介.21.2.1 磷的性质.21.2.2 磷的分布.21.2.2 磷的在钢中的破坏作用.21.3 国内外对高速钢磨屑回收的研究现状.31.3.1 国内对高速钢磨屑的回收利用情况以及发展目标.31.3.2 国外对高速钢磨屑的回收利用概况.31.4 国内外对高速钢磨屑的主要回收技术.41.4.1 湿法冶金技术.41.4.2 粉末冶金技术.41.4.3 真空炉回收技术.51.4.4 中频炉回收技术.51.4.5 直流电炉回收技术.51.4.6 电弧炉冶炼回收技术.51.4.7 金属热法回收技术.61.4.8 电热法回收技术.61.4.9 国内外高速钢磨屑的各种回收技术比较.61.5 本章小结.82 试验原理及试验方案拟定.

展开阅读全文
相关资源
相关搜索

当前位置:首页 > 行业资料 > 教育/培训

电脑版 |金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号