《RSC安装和使用》由会员分享，可在线阅读，更多相关《RSC安装和使用（10页珍藏版）》请在金锄头文库上搜索。
1、RSC2.2.1 安装和使用安装和使用一一Rsc 软件的安装软件的安装 rsc 软件不是系统默认安装的，要手工来安装，选择 solaris8 随机所带光盘中那个附加软件包的光盘，在文件管理器点击 installer 将自动来安装，选择客户自定义安装，在典型安装的基础上选择 rsc 软件包，按照提示安装即可。 二二Rsc 的以太网卡配置的以太网卡配置 1 以 root 用户登录系统。 2 确认系统平台。 3 进入 rscadm 的配置程序目录 4 运行初始化程序：rsc-initscript 5 配置 rsc，SUN280R# ./rsc-config 6 更改部分配置 SUN280R# ./r
2、scadm help 如： SUN280R# pwd / SUN280R# uname -i SUNW,Sun-Fire-280R SUN280R# cd /usr/platform SUN280R# ls FJSV,GPUU SUNW,Ultra-Enterprise-10000 NATE,s-Note_737S SUNW,UltraAX-MP NATE,s-Note_777S SUNW,UltraAX-e SUNW,Netra-T12 SUNW,UltraAX-e2 SUNW,Netra-T4 SUNW,UltraAX-i2 SUNW,Sun-Blade-100 SUNW,UltraSPA
3、RC-IIe-NetraCT-40 SUNW,Sun-Blade-1000 SUNW,UltraSPARC-IIe-NetraCT-60 SUNW,Sun-Fire SUNW,UltraSPARC-IIi-Engine SUNW,Sun-Fire-15000 SUNW,UltraSPARC-IIi-Netract SUNW,Sun-Fire-280R SUNW,UltraSPARC-IIi-cEngine SUNW,Sun-Fire-480R SUNW,UltraSPARCengine_CP-20 SUNW,Sun-Fire-880 SUNW,UltraSPARCengine_CP-40 SU
4、NW,Ultra-1 SUNW,UltraSPARCengine_CP-60 SUNW,Ultra-1-Engine SUNW,UltraSPARCengine_CP-80 SUNW,Ultra-2 TSBW,8000 SUNW,Ultra-250 TSBW,Ultra-2i SUNW,Ultra-30 sun4d SUNW,Ultra-4 sun4m SUNW,Ultra-5_10 sun4u SUNW,Ultra-60 sun4u-us3 SUNW,Ultra-80 sun4us SUNW,Ultra-Enterprise SUN280R# cd SUNW,Sun-Fire-280R SU
5、N280R# ls include lib rsc sbin SUN280R# cd rsc SUN280R# ls rsc-config rsc-initscript rscadm SUN280R# pwd /usr/platform/SUNW,Sun-Fire-280R/rsc SUN280R#./ rsc-initscript SUN280R# SUN280R# ./rsc-config Continue with RSC setup (y|n): y Set RSC date/time now (y|n|?) y: Server Hostname SUN280R: Edit custo
6、mer info field (y|n|?) n: Enable RSC Ethernet Interface (y|n|s|?) n: y RSC IP Mode (config|dhcp|?) dhcp: config RSC IP Address : 192.168.220.102 RSC IP Netmask 255.255.255.0: RSC IP Gateway : 192.168.220.1 Enable RSC Alerts (y|n|s|?) n: Enable RSC Modem Interface (y|n|s|?) n: Enable RSC Serial Port
7、Interface (y|n|s|?) n: Setup RSC User Account (y|n|?) y: Username : neusoft User Permissions (c,u,a,r|none|?) cuar: - Verifying Selections - General Setup - Set RSC date now = y Server Hostname = SUN280R Set Customer Info = n Is this correct (y|n): y Ethernet Setup - IP Mode = config IP Address = 19
8、2.168.220.102 IP Netmask = 255.255.255.0 IP Gateway = 192.168.220.1 Is this correct (y|n): y Alert Setup - - Alerts disabled Is this correct (y|n): y Modem Setup - - Modem disabled, ppp disabled Is this correct (y|n): y Serial Port Setup - - Serial port disabled Is this correct (y|n): y User Setup -
9、 User Name = neusoft User Permissions = cuar Is this correct (y|n): y This script will now update RSC, continue? (y|n): y Updating flash, this takes a few minutes . . . . . . . . Download completed successfully Resetting RSC (takes about 90 seconds): DONE Setting up server to update RSC date on boot
10、: DONE Setting up server hostname: DONE Setting up ethernet interface: DONE Disabling RSC alert engine: DONE Disabling modem interface: DONE Disabling serial port interface: DONE Adding user to RSC: rscadm: user already exists when this script completes, use the rscadm command to correct the error.
11、Resetting RSC (takes about 90 seconds): Are you sure you want to reboot RSC (y/n)? y DONE Setting up RSC date: DONE * RSC has been successfully setup * SUN280R# SUN280R# ./rscadm help USAGE: rscadm options For a list of commands, type “rscadm help“ rscadm - COMMANDS SUPPORTED help, date, set, show,
12、resetrsc, download, send_event, modem_setup, useradd, userdel, usershow, userpassword, userperm, shownetwork, loghistory, version rscadm - COMMAND DETAILS rscadm help = this message rscadm date -s | mmddHHMM | mmddHHMMccyy.SS = print or set date rscadm set = set variable to value rscadm show variabl
13、e = show variable(s) rscadm resetrsc -s = reset RSC (-s soft reset) rscadm download boot = program firmware or boot monitor rscadm send_event -c “message“ = send message as event (-c CRITICAL) rscadm modem_setup = connect to modem port rscadm useradd = add RSC user account rscadm userdel = delete RSC user account rscadm usershow username = show user details rscadm userpassword
