《动物ct微焦斑x光管》由会员分享，可在线阅读，更多相关《动物ct微焦斑x光管（6页珍藏版）》请在金锄头文库上搜索。
1、r_ Microfocus X-Ray Source 4 mm Anode to Object distance True round spot Grounded target = High power, 80W Integrated design No HV cable The choice for use with an x-ray optic due to close coupling (4 mm) Applications include microtomography, microdiffraction, microfluroescence, phase contrast imagi
2、ng, and many others. Technical Data Sheet Target Material / Part number Target Material / Part number Min. Voltage Min. Voltage Max. Voltage Max. Voltage Min. Power Min. Power Max. Power Max. Power Power Density Power Density Mo Mo (96002)(96002) 20 kV 60 kV 20 W 60 W 1.5 W/m Cu Cu (96000)(96000) 20
3、 kV 60 kV 20 W 60 W 1.5 W/m W W (96004)(96004) 10 kV 90 kV 10 W 80 W 2.5 W/m DS017 Rev. F X-Ray Technologies, Inc. X-Ray Technologies, Inc. 360 El Pueblo Rd, Ste 104 Scotts Valley, CA 95066 Phone (831) 439-9729 Fax (831) 439-6050 E-mail: Web site: Feature Anode Current Feature Anode Current .1 to
4、2 mAAnode Voltage Anode Voltage 10 to 90 kVMaximum Power Maximum Power 80 WFocal Spot Size Focal Spot Size 13 to 20 mCone AngleCone Angle33Minimum Distance Focus/ObjectMinimum Distance Focus/Object4 mmTarget Angle/Viewing AngleTarget Angle/Viewing Angle15/30Exit Window DiameterExit Window Diameter9.
5、50 mmX-Ray TubeX-Ray TubeIntegrated/SealedCooling Method Cooling Method Air (150 CFM 4“)Be Window Thickness Be Window Thickness 245 mCathode TypeCathode TypeDispenser CathodeWindow PositionWindow PositionEnd WindowEnvironment TemperatureEnvironment Temperature+10 to +55 COperation Operation Continuo
6、usApproximate Weight Approximate Weight 4 kgX-Ray Tube Unit Specifications X-Ray Tube Unit Specifications Functions Functions Key Switched Power, HV On/Off, kV Adjust, Brightness/Autofocus Adjust External Control External Control Remote control Power Consumption Power Consumption 100 W maximum Input
7、 Voltage Input Voltage 110/240 AC autosensing Approximate Weight Approximate Weight 4 kg HV Cable HV Cable Not Necessary LV Cable LV Cable Std 25 pin D-type connector (up to 25 feet) Controller Unit SpecificationsController Unit Specifications 牛津仪器 Oscar 137617631684mm r_ Microfocus X-Ray Source X-R
8、ay Technologies, Inc. X-Ray Technologies, Inc. 360 El Pueblo Rd, Ste 104 Scotts Valley, CA 95066 Phone (831) 439-9729 Fax (831) 439-6050 E-mail: Web site: 0.00E+002.00E+114.00E+116.00E+118.00E+111.00E+121.20E+12202530354045505560kVPhotons/sec/srTrue round focal spot provides for high flux, uniform
9、ly distributed. Actual focal spot image and flux distribution (40kV, 0.5mA, 20:1 geometric magnification) X-Ray Technologies, Inc. X-Ray Technologies, Inc. 360 El Pueblo Rd, Ste 104 Scotts Valley, CA 95066 Phone (831) 439-9729 Fax (831) 439-6050 E-mail: Web site: RS232 control command set Item RS2
10、32 Control Manual Operation Notes Remote/Local switch No Yes Switch is located on rear panel Power On/Off No Yes For remote operation, front panel On/Off switch must be “On” X-Ray On/Off Yes Yes For remote operation, front panel On/Off switch must be “On” Voltage up/down Yes No Front panel switch di
11、sabled Brightness Control Yes No Front panel switch disabled G3 Span adjust No Yes Rear panel Adjust G2 adjust No Yes Rear panel Adjust Mode switch for G3 No No Rear panel Adjust disabled Enter switch for G3 No No Rear panel Adjust disabled G3 adjust Yes No Internal control voltage disabled G3 zero
12、adjust No Yes Rear panel Adjust r_ Microfocus X-Ray Source Protocol: RS-232-C Baud Rate: 9600 ASYNC Flow Control: None Data Bits: 8 Stop Bits: 1 Parity: None Connector: Type: 25 pin FunctionsFunctions: Anode Voltage Set: 10 to 90kV (example : VCN 50 = set 50kV) Brightness Set: 10 to 80 Watts (exampl
13、e: WCN 40=set 40 watts) G3 voltage Set: 0 to 5kV (example: GCN 03=set 3kV) Command: X-ray ON/OFF Command: Voltage min-max set Command: Brightness min-max set Read backRead back: Voltage: (example : VM 30 = 30kV) Brightness: (example: WM20 = 20 watts) Status: Stand-by, warm-up, output, fault modes in
14、 ASCII format Fault: Display panel information except remote/local mode will be in ASCII format Other: ROM version number Power on can be accomplished remotely be X-ray on/off command. However, if filament is turned off, power is restored only through front panel on/off switch. X-Ray Technologies, Inc. X-Ray Technologies, Inc. 360 El Pueblo Rd, Ste 104 Scotts Vall
