安全阀标准汇总

《安全阀标准汇总》由会员分享，可在线阅读，更多相关《安全阀标准汇总（4页珍藏版）》请在金锄头文库上搜索。

1、1安全阀标准汇总安全阀标准汇总标准编号标准编号标准中文名称标准中文名称标准英文名称标准英文名称SY/T0525.1-93 石油储罐液压安全阀 SY/T10006-2000 海上井口地面安全阀和水下安全阀规范SY/T10024-1998 井下安全阀系统的设计、安装、修理和操作的推荐作法GB/T14087-1993 船用空气瓶安全阀Safety valves for marine air vesselJB/T6441-1992(2005 复审) 压缩机用安全阀 JB/T2203-1999 弹簧式安全阀 结构长度 JB/T9624-1999 电站安全阀技术条件 JB/T53170-1999 弹簧直接

2、载荷式安全阀 产品质量分等NF E86-512-1-2002 冷凝容器.防超压安全设施.第1 部分:冷凝设备的安全阀(Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1 : safety valves for cryogenic service.)NF A84-330-1982 气焊设备.乙炔发生器用“防回气断火”的液压安全阀和组合装置.规范和试验(GAS WELDING EQUIPMENT. HYDRAULIC SAFETY SEALS AND COMBINED “NON-

3、RETURN VALVE/FLAME ARRESTOR“ DEVICES FOR ACETYLENE GENERATORS. REQUIREMENTS AND TESTS.)NF E32-110-10-2002 水管锅炉和辅助设备.第 10 部分:防过压安全阀的要求(Water-tube boilers and auxiliary installations - Part 10 : requirements for safeguards against excessive pressure.)NF D36-404-2000 建筑阀门.温度和压力组合安全阀.试验和要求(Building valv

4、es - Combined temperature and pressure relief valves - Tests and requirements.)NF M87-213-2001 石油和天然气工业.下降孔设备.地下安全阀设备(Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment.)NF T81-103-1980 液态体化学产品的运输和装卸.底部注入或排放的罐车.内部关闭阀和安全阀.使用压力等于或小于巴(TRANSPORTATION AND HANDLI

5、NG OF LIQUID CHEMICAL PRODUCTS. TANKER VEHICLES FILLED AND EMPTIED FROM BELOW. INTERNAL SAFETY AND STOP VALVE. OPERATING PRESSURE EQUAL TO OR LESS THAN 4 BAR.)NF E29-420-1985 工业阀门.安全阀.技术说明书样式和协调证明书(INDUSTRIAL VALVES. SAFETY AND RELIEF VALVES. MODEL OF TECHNICAL SPECIFICATIONS AND CONFORMITY CERTIFIC

6、ATE.)NF P52-001-1975 取暖设备用安全阀.一般技术规范(SAFETY VALVES FOR HEATING INSTALLATIONS.)2NF E29-413-1989 工业阀门.安全阀流量计算.其他方法(INDUSTRIAL VALVE. SAFETY VALVES AND BURSTING DISC(S) DEVICES. CALCULATION OF THEORETICAL FLOWRATE.)NF E29-414-1992 工业阀门.安全阀门.安全阀门类型 S,G1,L1 和 L2 流率计算示例(INDUSTRIAL VALVES. SAFETY VALVES. E

7、XAMPLES FOR FLOWRATE CALCULATION OF SAFETY VALVES TYPES S,G1,L1 AND L2.)NF E29-415-1990 工业阀门.安全阀.G 平方型安全阀排出空气当量流量计算实例.GPL 标准蓄水池的应用(INDUSTRIAL VALVES. SAFETY VALVES. CALCULATION OF AIR EQUIVALENT FLOW CAPACITY FOR SAFETY VALVES OF TYPE G2. APPLICATION FOR STANDARD VESSELS FOR GPL.)NF E29-421-1987 工业阀

8、门.安全阀.安全膜.为获得工作特性的安装规范(Industrial valves. Safety valves. Bursting discs.)NF D36-403-2000 建筑阀门.压力安全阀.试验和要求(Building valves - Pressure safety valves - Tests and requirements.)ANSI/UL 132-2002 无水氨气和液化石油气的安全阀的安全标准 (Standard for Safety for Safety Relief Valves for Anhydrous Ammonia and LP-Gas )ANSI Z21.2

9、2a Addenda-1990 热水供给系统用安全阀和煤气自动关闭系统.补充件(Relief valves and automatic gas shutoff devices for hot water supply systems; Addenda)ANSI Z21.22-1986 热水供给系统用安全阀和煤气自动关闭系统(Relief valves and automatic gas shutoff devices for hot water supply systems)ANSI/API 527-1991 安全阀的阀座紧密性(Seat Tightness of Safety Relief

10、Valves)标准编号标准编号标准中文名称标准中文名称标准英文名称标准英文名称BS EN 13953-2003 液化石油气(LPG)用移动式可填充储气瓶的减压安全阀(Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)BS EN 13648-1-2002 冷凝容器.防超压保护设施.冷凝设备的安全阀(Cryogenic vessels - Safety devices for protection against excessive pressure - Sa

11、fety valves for cryogenic service)BS EN 1489-2000 建筑物阀门.压力安全阀门.试验和要求(Building valves - Pressure safety valves - Tests and requirements)BS EN ISO 10432-2000 石油和天燃气工业.下井设备.地下安全阀设备(Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment)EN ISO 10432-1999 石油和天然气工业 下

12、降孔设备 地下安全阀设备Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999)EN 1489-2000 建筑阀门 压力安全阀门 试验和要求Building valves - Pressure safety valves - Tests and requirementsprEN 45512-1994 采购指南 管道系统和阀 包括安全阀的锅炉和高压管道阀Guide for procurement - Pipework and valv

13、es - Boiler and high pressure piping valves including safety valves3EN 13648-1-2002 低温容器 抗过压保护安全设备 第 1 部分：低温服务用安全阀Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic serviceprEN ISO 4126-1-2003 防止过压防护的安全装置 第1 部分：安全阀Safety devices for pro

14、tection against excessive pressure - Part 1: Safety valves (ISO/FDIS 4126-1:2003)prEN ISO 4126-4-2003 保护额外压力的安全设备 第 4 部分：飞行员操作安全阀Safety devices for the protection against excessive pressure - Part 4: Pilot operated safety valves (ISO/FDIS 4126-4:2003)BS 1123-1-1987 压缩空气或惰性气体装置用安全阀、计量表和易熔塞.第 1部分:安装实用

15、规程(Safety valves, gauges and fusible plugs for compressed air or inert gas installations - Code of practice for installation)BS 6759-2-1984 安全阀.第 2 部分:惰性气体或压缩空气用安全阀规范(Safety valves - Specification for safety valves for compressed air or inert gases)BS 6759-1-1984 安全阀.第 1 部分:蒸汽与热水用安全阀规范(Safety valves

16、 - Specification for safety valves for steam and hot water)BS 6759-3-1984 安全阀.第 3 部分:工作流体用安全阀规范(Safety valves - Specification for safety valves for process fluids)DIN 3394-3-2004 自动控制阀.第 3 部分:压力为4 巴及以下的 0 级减压安全阀(Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar)DIN 5589-1990 有轨车辆的压缩空气装置.安全阀.安装和连接尺寸.要求(Compressed air equipment for rail vehicles; safety valves; mounting and connecting dimensions, requirements)DIN EN ISO 10432-2000 石油和天燃气工业.下山巷道设备.地下安全阀规