《毕业设计 康泰医院火灾自动报警系统设计》由会员分享，可在线阅读，更多相关《毕业设计 康泰医院火灾自动报警系统设计（41页珍藏版）》请在金锄头文库上搜索。
1、毕业设计（论文）I康泰医院火灾自动报警系统设计摘摘 要要本次毕业设计的题目是吉林康泰医院火灾自动报警系统设计，首先对建筑的概况进行了简单的描述，然后根据建筑分类、分级进行系统的设计，主要内容包括防火分区的划分、报警区域和探测区域的划分、系统选型设计、火灾探测器设计、火灾自动报警系统的主要配套设备设计、消防联动系统及消防系统的供电、线路敷设和接地等。设计严格遵循国家规范以及相关标准，从康泰医院综合楼的实际情况出发进行火灾自动报警系统的设计，并且结合部分国外的相关先进经验和设计方法，力求比较完整的设计出该建筑的火灾自动报警系统。关键词：火灾探测器；联动控制；探测区域；集中报警系统毕业设计（论文）I
2、IAbstractThis paper is mainly about the design of fire auto alarm system for the Kang Tai Hospital in JILIN. The description on environment of the building has been done and the design of the fire auto alarm system for this building has been carried out based on the relative national codes. First, f
3、ire zones and monitoring zones were divided and then the style of the whole system was decided. Second, the number of fire detectors used in each monitoring zones was calculated and the types were chosen .Third, the major related facilities of the fire auto alarm and its linkage system were selected
4、. At last, an overall planning of the power supply system, the comprehensive line-fixing system and the grounding system was made for the fire system.The design based on the actual structure of the building followed the national codes and relative standards strictly, absorbed the advanced internatio
5、nal technology and experience and made every effort to offer a relatively complete and efficient fire auto alarm system for this building.Keywords: Fire detector; Chain control; Monitoring Zones; Remote alarm system毕业设计（论文）III目目 录录1 引 言.12 工程概况以及建筑的分类和系统保护对象分级.22.1 自然环境.22.2 工程概况.22.3 建筑的分类、分级.23 防火
6、分区的划分.54.报警区域和探测区域的划分.74.1 报警区域的划分.74.2 探测区域的划分.75 系统设计.95.1 一般规定.95.2 系统形式的要求和选择.95.3 火灾自动报警系统线制的选择.105.4 火灾探测器的分类.115.5 火灾探测器的选择及型号的确定.125.5.1 火灾探测器的选择.125.5.2 火灾探测器、火灾报警控制器、楼层显示器型号的确定.136 火灾探测器的设置.146.1 火灾探测器的设置数量及布置.146.2 感烟探测器安装要求.216.3 地下车库可燃气体探测器的设置与布置.22毕业设计（论文）IV6.4 可燃气体探测器的联动关系.237 火灾自动报警系统的主要配套设备.257.1 手动报警按钮的设置.257.2 消火栓报警按钮.257.3 火灾自动报警系统常用模块.257.4 声光报警器.267.5 消防专用电话.267.6 火灾应急广播.
