《ap瘦切换胖(boot-loader)》由会员分享,可在线阅读,更多相关《ap瘦切换胖(boot-loader)(6页珍藏版)》请在金锄头文库上搜索。
1、AP 瘦切换胖(boot-loader)升级准备:#下载版本文件#搭建 TFTP 服务器#配置网卡的 ip 地址升级过程:dirDirectory of flash:/0 -rw- 7224320 Aug 08 2008 20:00:00 wa2600a_fit.bin1 -rw- 808 Apr 26 2000 12:02:04 startup.cfg30177 KB total (23117 KB free)sys%Apr 26 12:05:27:101 2000 WA2620i-AGN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has ex
2、ited zero configuration state.WA2620i-AGNinterface Vlan-interface 1 /瘦版本 vlan 1 接口是自动获取,没有 ip 地址,此处配置 ip 地址为了和 tftp 服务器通信WA2620i-AGN-Vlan-interface1ip address 192.168.0.50 24 WA2620i-AGN-Vlan-interface1dis this #interface Vlan-interface1ipv6 address autoip address 192.168.0.50 255.255.255.0 /配置 ip 地
3、址成功ipv6 address dhcp-alloc#returnWA2620i-AGN-Vlan-interface1quitWA2620i-AGNquittftp 192.168.0.10 put wa2600a_fit.bin /将瘦版本文件上传到 tftp 服务器上(电脑本地)tftp 192.168.0.10 get wa2600a_fat.bin /从 tftp 服务器上获取软件版本File will be transferred in binary mode Downloading file from remote TFTP server, please wait.TFTP: 9
4、127936 bytes received in 67 second(s) File downloaded successfully. /成功下载软件版本dirDirectory of flash:/0 -rw- 7224320 Aug 08 2008 20:00:00 wa2600a_fit.bin1 -rw- 808 Apr 26 2000 12:02:04 startup.cfg2 -rw- 9127936 Apr 26 2000 12:07:54 wa2600a_fat.bin /胖版本30177 KB total (14203 KB free)boot-loader file wa2
5、600a_fat.bin main /指定为加载的主文件Verifying boot file .This command will set the boot file. Continue? Y/N:Y /确认加载%Apr 26 12:01:37:775 2000 WA2620i-AGN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.YThe specified file will be used as the main boot file at the next reboot
6、on slot 1!display boot-loaderThe boot file used this time:flash:/wa2600a_fit.bin attribute: mainThe boot file used next time:flash:/wa2600a_fat.bin attribute: main /下次启动为胖版本Failed to get the backup boot file used next time!Failed to get the secure boot file used next time!reboot /重启Start to check co
7、nfiguration with next startup configuration file, please wait.DONE!This command will reboot the device. Current configuration will be lost, save current configuration? Y/N:N /不保存配置This command will reboot the device. Continue? Y/N:Y /确认重启#Apr 26 12:02:11:179 2000 WA2620i-AGN DEVM/1/REBOOT: Reboot de
8、vice by command. %Apr 26 12:02:11:179 2000 WA2620i-AGN DEVM/5/AC_REBOOT: System is rebooting now.%Apr 26 12:02:13:279 2000 WA2620i-AGN IFNET/3/LINK_UPDOWN: GigabitEthernet1/0/1 link status is DOWN.%Apr 26 12:02:13:281 2000 WA2620i-AGN IFNET/3/LINK_UPDOWN: Vlan-interface1 link status is DOWN.%Apr 26
9、12:02:System is starting.Press Ctrl+D to access BASIC-BOOTWARE MENUBooting Normal Extend BootWare.The Extend BootWare is self-decompressing.Done!* * H3C WA2620i-AGN BootWare, Version 3.04 * *Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.Compiled Date : Sep 15 2014CPU Type : AR9350CPU L1
10、 Cache : 32KBCPU Clock Speed : 560MHzMemory Type : SDRAMMemory Size : 128MBMemory Speed : 480MHzBootWare Size : 512KBFlash Size : 32MBCPLD Version : 004PCB Version : Ver.EBootWare Validating.Press Ctrl+B to enter extended boot menu.Starting to get the main application file-flash:/wa2600a_fat.bin!.Th
11、e main application file is self-decompressing.Done!Extend BootWare Version is not equal,updating? Y/NUpdating Extend BootWare.Done!Basic BootWare Version is not equal,updating? Y/NUpdating Basic BootWare.Done!BootWare updated,System is rebooting now.System is starting.Press Ctrl+D to access BASIC-BO
12、OTWARE MENUBooting Normal Extend BootWare.The Extend BootWare is self-decompressing.Done!* * H3C WA2620i-AGN BootWare, Version 2.11 * *Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.Compiled Date : Jan 9 2014CPU Type : AR9350CPU L1 Cache : 32KBCPU Clock Speed : 560MHzMemory Type : SDRAMMemory Size : 128MBMemory Speed : 480MHzBootWare Size