《LECTURE10 LAN WIRING,PHYSICAL TOPOLOGY,AND INTERFACE》由会员分享，可在线阅读，更多相关《LECTURE10 LAN WIRING,PHYSICAL TOPOLOGY,AND INTERFACE（29页珍藏版）》请在金锄头文库上搜索。
1、Computer Networks and Internets计算机网络与因特网课件 林坤辉 2004-02-6,PART II Packet Transmission,Chapter 10 LAN Wiring, Physical Topology, and Interface Hardware局域网布线、物理拓扑和接口硬件,10.2 Speeds of LANs and Computer计算机与局域网的速度,Each network technology specifies a rate at which data must be sent.Many LANs operate at a r
2、ate so fast that a computers CPU cannot process bits at network speed.The speed at which a network operates is usually fixed in the design-the speed does not depend on the CPU rates of the attached computers.,10.3 Network Interface Hardware,the computers CPU does not handle the transmission or recep
3、tion of individual bits.A NIC connects a computer to a network, and handles all the details of packet transmission and reception. A NIC understands the electrical signals used on a network, the rate at which data must be sent or received, and the details of the network frame format.,A NIC designed t
4、o be used with Ethernet cannot be used with a Token Ring network. A NIC designed to be used with a Token Ring cannot be used with an FDDI ring.Most NICs contain Direct Memory Access(DMA) circuit.A NIC functions like an I/O device.A NIC uses the computers interrupt mechanism to inform the CPU.,10.4 T
5、he Connection Between A NIC and A Network,The type of connection used between a NIC and a network depends on the network technology.,10.5 Original Thick Ethernet Wiring 粗缆以太网布线,The shared medium consists of a thick coaxial cable.Each computer connected to the network requires a hardware device known
6、 as a transceiver(收发器) .The cable connecting a NIC to a transceiver is known as an Attachment Unit Interface(AUI).,10.6 Connection Multiplexing多路复用连接,Formally called 10Base5.A connection multiplexor allows multiple computers to attach to a single transceiver.A connection multiplexor is an electronic
7、 device designed to provide exactly the same signals as a conventional transceiver.,10.7 Thin Ethernet Wiring细缆以太网布线,Formally called 10Base2.Thinnet generally costs less.No external transceivers are needed.Thinnet does not use an AUI.Thinnet attaches directly to the back of each computer using a BNC
8、 connector.,10BASE-2连接示意图,10.8 Twisted Pair Ethernet 双绞线以太网,Formally called 10BaseT.The 10BaseT does not use a coaxial cable.The 10BaseT uses an electronic device known as Enthernet hub.The connection between a computer and the hub uses twisted pair wiring with RJ-45 connectors.,10BASE-T连接示意图,IEEE80
9、2.3 的三种接线方式,10BASE-FL连接示意图,10.9 Advantages and Disadvantages of Wiring Schemes,10.10 The Topology Paradox拓扑悖论,The 10BaseT wiring forms a star topology with the hub as the center of the star.A twisted pair Ethernet functions like bus, because all computers share a single communication medium.Physical
10、ly, twisted pair Ethernet uses a star topology.Logically, twisted pair Ethernet function like a bus, and it is often called a star-shaped bus.,10.11 Network Interface Cards and Wiring Schemes,A network interface must support a wiring scheme as well as a network technology.To make it possible to chan
11、ge wiring schemes without changing interface hardware, many network interface support multiple wiring schemes.Only one connector can be active at a time.,10.12 Wiring Schemes and Other Network Technologies,Almost any network technology can support multiple wiring schemes, and the logical topology may differ from the physical topology.The original LocalTalk wiring scheme uses transceivers.Hub wiring is often used with a LocalTalk. Hub wiring is often used with an IBM Token Ring.,
