《LTE协议36213_930》由会员分享，可在线阅读，更多相关《LTE协议36213_930（79页珍藏版）》请在金锄头文库上搜索。
1、3GPP TS 36.213 V9.3.0 (2010-09)Technical Specification3rd Generation Partnership Project;Technical Specification Group Radio Access Network;Evolved Universal Terrestrial Radio Access (E-UTRA);Physical layer procedures(Release 9)The present document has been developed within the 3rd Generation Partne
2、rship Project (3GPP TM) and may be further elaborated for the purposes of 3GPP. The present document has not been subject to any approval process by the 3GPP Organisational Partners and shall not be implemented. This Specification is provided for future development work within 3GPP only. The Organis
3、ational Partners accept no liability for any use of this Specification.Specifications and reports for implementation of the 3GPP TM system should be obtained via the 3GPP Organisational Partners Publications Offices.KeywordsUMTS, radio, layer 13GPPPostal address3GPP support office address650 Route d
4、es Lucioles Sophia AntipolisValbonne FranceTel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16Internet.3gpp.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media. 2010, 3GPP Organizatio
5、nal Partners (ARIB, ATIS, CCSA, ETSI, TTA, TTC).All rights reserved.UMTS is a Trade Mark of ETSI registered for the benefit of its members3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational PartnersLTE is a Trade Mark of ETSI currently being register
6、ed for the benefit of its Members and of the 3GPP Organizational PartnersGSM and the GSM logo are registered and owned by the GSM AssociationContentsForeword51Scope62References63Definitions, symbols, and abbreviations73.1Symbols73.2Abbreviations74Synchronisation procedures84.1Cell search84.2Timing s
7、ynchronisation84.2.1Radio link monitoring84.2.2Inter-cell synchronisation84.2.3Transmission timing adjustments85Power control95.1Uplink power control95.1.1Physical uplink shared channel95.1.1.1UE behaviour95.1.1.2Power headroom125.1.2Physical uplink control channel125.1.2.1UE behaviour125.1.3Soundin
8、g Reference Symbol145.1.3.1UE behaviour145.2Downlink power allocation155.2.1 eNodeB Relative Narrowband TX Power restrictions166Random access procedure166.1Physical non-synchronized random access procedure176.1.1Timing176.2Random Access Response Grant177 Physical downlink shared channel related proc
9、edures197.1UE procedure for receiving the physical downlink shared channel197.1.1 Single-antenna port scheme227.1.2 Transmit diversity scheme237.1.3 Large delay CDD scheme237.1.4 Closed-loop spatial multiplexing scheme237.1.5 Multi-user MIMO scheme237.1.5A Dual layer scheme237.1.6 Resource allocatio
10、n237.1.6.1Resource allocation type 0237.1.6.2Resource allocation type 1247.1.6.3Resource allocation type 2257.1.7 Modulation order and transport block size determination267.1.7.1Modulation order determination277.1.7.2Transport block size determination277.1.7.2.1Transport blocks not mapped to two-lay
11、er spatial multiplexing287.1.7.2.2Transport blocksmapped to two-layer spatial multiplexing347.1.7.2.3Transport blocks mapped for DCI Format 1C347.1.7.3Redundancy Version determination for Format 1C357.2UE procedure for reporting channel quality indication (CQI), precoding matrix indicator (PMI) and
12、rank indication (RI)357.2.1Aperiodic CQI/PMI/RI Reporting using PUSCH387.2.2Periodic CQI/PMI/RI Reporting using PUCCH427.2.3Channel quality indicator (CQI) definition487.2.4Precoding Matrix Indicator (PMI) definition507.3UE procedure for reporting ACK/NACK518Physical uplink shared channel related pr
13、ocedures548.1Resource Allocation for PDCCH DCI Format 0578.2UE sounding procedure578.3UE ACK/NACK procedure608.4UE PUSCH Hopping procedure608.4.1 Type 1 PUSCH Hopping618.4.2 Type 2 PUSCH Hopping628.5UE Reference Symbol procedure628.6Modulation order, redundancy version and transport block size deter
14、mination628.6.1 Modulation order and redundancy version determination628.6.2 Transport block size determination648.6.3 Control information MCS offset determination648.7UE Transmit Antenna Selection669Physical downlink control channel procedures669.1UE procedure for determining physical downlink cont
15、rol channel assignment669.1.1 PDCCH Assignment Procedure669.1.2 PHICH Assignment Procedure679.2PDCCH validation for semi-persistent scheduling6810Physical uplink control channel procedures7010.1UE procedure for determining physical uplink control channel assignment7010.2Uplink ACK/NACK timing7511 Physical multicast channel related procedures7611.1UE procedure for receiving the physical mu
