《华能长春热电厂锅炉联锁保护试验卡.doc》由会员分享，可在线阅读，更多相关《华能长春热电厂锅炉联锁保护试验卡.doc（120页珍藏版）》请在金锄头文库上搜索。
1、 吉林省电力科学研究院有限公司 华能长春热电厂2号机组华能长春热电厂2号锅炉热工联锁保护试验卡吉林省电力科学研究院有限公司二九年十一月十日目录锅炉联锁保护（程控）试验卡MFT1锅炉联锁保护（程控）试验卡锅炉吹扫4锅炉联锁保护（程控）试验卡OFT6锅炉联锁保护（程控）试验卡锅炉点火7锅炉联锁保护（程控）试验卡A火检冷却风机11锅炉联锁保护（程控）试验卡B火检冷却风机12锅炉联锁保护（程控）试验卡A磨煤机13锅炉联锁保护（程控）试验卡B磨煤机23锅炉联锁保护（程控）试验卡C磨煤机33锅炉联锁保护（程控）试验卡D磨煤机43锅炉联锁保护（程控）试验卡E磨煤机53锅炉联锁保护（程控）试验卡F磨煤机68锅
2、炉联锁保护（程控）试验卡A空气预热器78锅炉联锁保护（程控）试验卡B空气预热器82锅炉联锁保护（程控）试验卡A送风机86锅炉联锁保护（程控）试验卡B送风机90锅炉联锁保护（程控）试验卡A引风机94锅炉联锁保护（程控）试验卡B引风机98锅炉联锁保护（程控）试验卡A一次风机102锅炉联锁保护（程控）试验卡B一次风机106锅炉联锁保护（程控）试验卡暖风器疏水泵110锅炉联锁保护（程控）试验卡烟温探针111锅炉联锁保护（程控）试验卡锅炉疏水泵A113锅炉联锁保护（程控）试验卡锅炉疏水泵B115锅炉联锁保护（程控）试验卡A密封风机117锅炉联锁保护（程控）试验卡B密封风机119300 yuan, the
3、 unit will charge a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 12 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the re
4、levant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the compan
5、y. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative l
6、eadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, sho
7、uld perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial
8、 pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium3锅炉联锁保护（程控）试验卡MFT专业：锅炉 编号：GL-LS001 项目名称：MFT序号内容功能试验方式结果时间备注1BTG盘手动停炉按钮；MFT（满足任一条件）送控制电源，引风机、送风机、一次风机、磨煤机在试验位，空气预热器变频送电、输出断开，火检冷却风机送工作电源，由热工人员短接线或输入模拟量信号2炉膛压力高
9、（3取2）延时3S；+2.5kPa3炉膛压力低（3取2）延时3S；-2.5kPa4给水流量低低（3取2）延时15S；275t/h5给水泵全停6送风机全停；7引风机全停；8空气预热器全停，延时300S；9火检冷却风压力低低（3取2），延时600S；3 kPa10总风量30%（3取2），延时10S；11再热器保护动作（机组负荷105MW，主汽门关闭；或者机组负荷105MW，主汽门关闭且高低旁开度=0)12全燃料丧失13全火焰丧失14一次风机全停且有磨运行且无油枪投运15ETS动作：负荷大于122MW（35%BMCR）汽轮机跳闸16磨煤机全停（硬接线/软逻辑）发生MFT后的联锁送控制电源，引风机、送
10、风机、一次风机、磨煤机在试验位，空气预热器变频送电、输出断开，火检冷却风机送工作电源，由热工人员短接线或输入模拟量信号17给煤机全停（硬接线/软逻辑）18关燃油进油气动快关阀（硬接线/软逻辑）19关燃油回油气动快关阀（硬接线/软逻辑）20一次风机全停（硬接线/软逻辑）21过热减温水气动门全关（硬接线/软逻辑）22停AB气动给水泵（硬接线）23停FGD（硬接线）24跳等离子（软逻辑）25二次风门自动全开置吹扫位（软逻辑）26磨出口门全关（软逻辑）27过热减温水电动门全关（软逻辑）28油角阀全关（软逻辑）29去ETS调试负责人： 调试试验人： 运行试验人：3锅炉联锁保护（程控）试验卡锅炉吹扫专业：
11、锅炉 编号：GL-LS002 项目名称：锅炉吹扫序号内容功能试验方式结果时间备注1无锅炉MFT跳闸条件锅炉吹扫允许（满足全部条件）送控制电源，引风机、送风机、一次风机、磨煤机在试验位，空气预热器变频送电、输出断开，火检冷却风机送工作电源，由热工人员短接线或输入模拟量信号2AB空气预热器均运行3任一送风机运行4任一引风机运行5所有辅助风挡板在吹扫位置6炉膛无火焰7所有油角阀、吹扫阀全关8所有磨煤机出口闸门全关9所有给煤机全停10进油速关阀已关11所有点火枪、油枪均退到位12吹扫风量合适（420t/h总风量560t/h）13炉膛压力正常14任一给水泵运行15给水流量正常（275t/h）16火检冷却
12、风压力不低（5.5kPa）17油泄漏试验成功或已旁路调试负责人： 调试试验人： 运行试验人： 锅炉联锁保护（程控）试验卡OFT专业：锅炉 编号：GL-LS003 项目名称：OFT序号内容功能试验方式结果时间备注1燃油母管压力低低（3取2）且任意油角阀未关闭：1.0MPaOFT（满足任一条件）送控制电源，由热工人员短接线或输入模拟量信号2锅炉MFT动作3进油速关阀关指令4进油速关阀关闭5无OFT跳闸条件OFT复归条件（满足所有条件）送控制电源，由热工人员短接线或输入模拟量信号6所有油角阀全关7开进油速关阀调试负责人： 调试试验人： 运行试验人： 锅炉联锁保护（程控）试验卡锅炉点火专业：锅炉 编号：GL-LS004 项目名称：锅炉点火序号内容功能试验方式结果
