《M109-清洁度检查记录【安装施工记录】【GHOE】》由会员分享，可在线阅读，更多相关《M109-清洁度检查记录【安装施工记录】【GHOE】（2页珍藏版）》请在金锄头文库上搜索。
1、海阳核电工程施工总承包部CNF Haiyang NPP Construction Project Managemen清洁度检查记录RECORD OF CLEANLINESS 记录代码Record codeM109记录编号Record No页码Page检查试验计划编号/版本ITP NO./Rev. 图纸号/版本Dwg. No./Rev. APP-GW-Z0-602 REV.2堆号/ Reactor No. 1厂房/Building 11区域/Area ：2系统号/System No.：PXS检测项目Checking item要求Requirement结果Results金属清洁Metal Clea
2、nC非耐蚀合金区域保护Protecting for non-corrosion Resistant Alloys设备外观油漆完整Surface painting complete保护区或保护层Protected Area or Covering保护区是否覆盖保护层Protection device金属清洁Metal Clean:肉眼检查为干净状态，没有油漆、石油、油脂、焊剂、熔渣、热处理和热成型氧化皮（由焊接产生的坚固的保护层在某些表面上允许存在）、污垢、垃圾、金属粒和磨粒和其他肉眼能看到的污染物。The visual inspection of being clean and free of
3、 paint, oil, grease, welding flux, slag, heat-treating and hot-forming scale (tightly adherent scale resulting from welding may be permissible on some surfaces), dirt, trash, metal and abrasive particles and chips, and other gross contamination. 非耐蚀合金Non-corrosion Resistant Alloys:像碳钢和低合金钢的合金，不能抵抗操作
4、环境中的化学物攻击。Alloys such as carbon and low alloy steels that may notresist chemical attack in air, water, or an operating environment.保护区或保护层Protected Area or Covering 用聚乙烯之类的材料遮盖或其它保护方式保护的区域，这样不会造成污染。 This protection shall be an area or a suitable covering such as polyethylene sheet where contamination of the items by unacceptable materials will not occur.施工班组/Construction Team技术人员/Technical Personnel质检人员/Qc Personnel签字/Signature日期/Date签字/Signature日期/Date签字/Signature：日期/ Date：2精品文档
