《ac 800pec 软件指南》由会员分享，可在线阅读，更多相关《ac 800pec 软件指南（48页珍藏版）》请在金锄头文库上搜索。
1、内部资料注意保密ABB 励磁控制器 AC 800PEC 软件指南溪洛渡水力发电厂筹建处二一年十二月ABB ControlIT AC 800PECSoftware GuideSoftware Version 3.5Prepared by:Dokman AGNaglerwiesenstrasse 2CH-8049 ZrichNotice The information in this document is subject to change without notice and should not be construed（认识） as a commitment by ABB Automati
2、on Technology Products（这篇文章中的信息未经通知被改变的，不应认为是ABB自动化技术产品的承诺）. ABB Automation Technology Products assumes（承担） no responsibility for any errors that may appear in this document（ABB自动化技术产品不承担出现在这篇文章中的任何错误）.In no event shall ABB Automation Technology Products be liable for direct, indirect, special, inci
3、dental or consequential damages（间接损失、重要损失） of any nature or kind arising from the use of this document, nor shall ABB Automation Technology Products be liable for incidental or consequential damages arising from use of any software or hardware described in this document（ABB自动化技术产品绝不承担因任何自然或使用这篇文章而产生
4、的直接、间接、特别或重要损失，也不承担因使用这篇文章中描述的软件或硬件而产生的间接损失或重要损失）.This document and parts thereof must not be reproduced or copied without written permission from ABB Automation Technology Products（本篇文章及其部分未经ABB自动化技术产品书面允许不得复制）, and the contents thereof must not be imparted to a third party nor used for any unautho
5、rized purpose（其内容也不能透露给第三方或被未授权的用途所用）. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license（本文所描述的软件或硬件是在许可证下提供的，只有根据那些许可证才可能被使用、复制或透露）.溪洛渡右岸电站采用ABB UNITROL 6800励磁系统，溪洛渡水力发电厂作为其检修、维护和运
6、行的单位，学习和翻译了本手册。本资料由三峡电厂丁进伟翻译，由xxxxxxx校核，由溪洛渡电厂筹建处陈小明审核。由于水平有限，难免有错，请读者阅读原文。本翻译资料仅为内部学习资料，注意保密，不得外传。溪洛渡水力发电厂筹建处2010-11-10Copyright 2004 ABB Automation Technology Products.All rights reserved.Document release: December 22, 2004Document number: 3BHS208614 ZAB E01Trademarks（商标） Registrations and tradema
7、rks used in this document include（本文所用到的注册商标包括）:IndustrialIT Registered trademark of ABB Ltd, SwitzerlandControlIT Registered trademark of ABB Ltd, SwitzerlandOperateIT Registered trademark of ABB Ltd, SwitzerlandAnyBus-S Registered trademark of HMS Industrial Networks, SwedenEthernet Trademark of X
8、erox CorporationHCS Registered trademark of SpecTran Corporation, U.S.A.MATLAB Registered trademark of The MathWorks, Inc, U.S.A.OPC Trademark of OPC FoundationReal-Time Workshop Registered trademark of The MathWorks, Inc, U.S.A.Simulink Registered trademark of The MathWorks, Inc, U.S.A.VXWorks Regi
9、stered trademark of Wind River Systems（风河系统） Inc., U.S.A.Windows, Windows 2000 Registered trademark of Microsoft Corporation.The fieldbus names and products mentioned in this document are trademarks or registered trademarks（注册商标） of their respective holders（本文所提到的现场总线名称和产品是他们各自持有者的商标或者注册商标）.Table of
10、 Contents（目录）List of Figures （图目录）.9List of Tables （表格目录）11List of Reference Documents （相关文件目录）.13List of Terms and Abbreviations （术语和缩写目录）.15Chapter 1 - Introduction （介绍）.191.1 General .191.1.1 Summary: Product Characteristics and Field of Application（概述：产品特点和应用领域）. 191.1.2 Terminology（术语）. 191.2 I
11、ntended Use of this Guide（该指南的预期作用）. 191.2.1 Contents of the AC 800PEC System Documentation （AC 800PEC系统文章内容）.191.2.2 Purpose of the Software Guide（软件指南目的）. 201.2.3 Prerequisites to Understand this Software Guide（理解该软件指南的前提条件） .201.3 Contents of this Guide（指南内容） 21Chapter 2 - Software Overview（软件概述）
12、.232.1 General 232.2 Software Topology （软件拓扑结构）.232.2.1 Software Structure （软件结构）.232.2.2 Engineering Workflow: Overview （工程工作流程：概述）242.2.3 Application Structure （应用程序结构）252.2.4 Control Builder M （控制生成器M）.262.2.5 Design Tool for Fast Applications （快速应用程序的设计工具）26Chapter 3 - Functional Description: Software（软件功能描述）.293.1 General .293.2 ControlIT Level: What is New with the AC 800PEC（ControlIT级：AC 800PEC的新点） .293.3 Fast Control Software: Programming with MATLAB/Simulink（快速控制软件：用MATLAB/Simulink编程） .303.3.1 General .303.3.2 Control Functions （控制功能）313.4 Fast Con
