《paper-twirier_p_e_a4》由会员分享,可在线阅读,更多相关《paper-twirier_p_e_a4(3页珍藏版)》请在金锄头文库上搜索。
1、Never aim it at another person. Play with it in a park or other open area.Be careful of the sharp corners when playing. Do not swing it around, or run with it in your hand. Assembly Instructions Tools 1. Carefully cut out the parts. 2. Fold along the dotted lines, making mountain or valley folds as
2、indicated. 3. Attach the glue spots on each part together. 4. Glue the parts together, and youre done. *Please read the Assembly Instructions carefully before you begin. Scissors, Glue (We recommend quick-drying paper glue) How to assemble your model neatly Scoring along the fold lines in advance wi
3、th a dried up pen or a ruler with slightly sharp corners will result in a neater model. *Be careful not to press too hard as the paper may tear. Notation Key Scissors lineMountain fold Cut in lineValley fold Glue spot Caution Keep scissors and glue away from small children. Be careful not to cut you
4、r fingers when using scissors. Cautions for playing Paper Twirler (Pink) Assembling the paper twirler Cut out the parts For the parts inside the red lines, first cut along the red line, fold along the red dotted line in the center, and glue the halves together at the back. Glue Glue Once the glue is
5、 completely dry, cut out the part by following the scissors line on the front. For other parts, simply cut them out along the scissors lines. Assembling the shaft Put the part face up on the edge of a table and roll it while applying pressure, to give the part a curve. Fold the edge to make a triang
6、ular prism, and then roll it up into a stick (about 5mm in diameter). Finally, glue down the end so that it doesnt get unraveled. Attach the parts together to complete Fold the wings as indicated, and cut a hole to insert the shaft. Fit the wings onto the shaft, attach the wings stopper, and youre done! Paper Twirler (Pink) / Assembly Instructions Wing Wings stopper Shaft Paper Twirler (Pink) / Pattern