《marine-iguana_i_e_a4》由会员分享，可在线阅读，更多相关《marine-iguana_i_e_a4（7页珍藏版）》请在金锄头文库上搜索。
1、 Parts sheet: 10 pages Number of parts: Iguana 30 parts, Rock 3 parts Assembly Instructions: 7 pages Notation Key Mountain fold Make a mountain fold. Scissors line Cut along the line. Valley fold Make a valley fold. Assembly Instructions 1: Carefully cut out all the pieces. 2: Make mountain folds an
2、d valley folds along the dotted lines, as indicated. 3: Attach the pieces together in order of the numbers on the glue spots, and assemble the parts. PAGE01 Marine iguana: Assembly Instructions Marine iguana Scientific name: Amblyrhynchus cristatus The marine iguana is a large reptile distributed in
3、 the Galapagos Islands, a part of Ecuador, South America. Its body reaches 120 to 150 cm in length. It feeds mainly on seaweed, meaning it is suited to the ocean, a trait which makes the marine iguana unique from other lizards. A marine iguana will bask in the sun for a long time to raise its body t
4、emperature enough, before entering the sea. Its laterally flattened tail is well-suited to swimming, and it has glands near its nose to expel excess salt ingested from the sea water. On its head are rough bumps, and on its neck and back is a row of spine-like scales, known as a crest. All four of it
5、s legs feature sharp claws, which have evolved to allow the marine iguana to cling firmly to rocks in the ocean and feed on the marine plants, even in the rapid currents found around the Galapagos Islands. Scissors, set square, glue (such as woodwork glue), metal rod, spatula, a used pen, toothpicks
6、, tweezers (useful for handling small parts). Before gluing, crease the paper along mountain fold and valley fold lines and make sure rouned sections are nice and stiff. This craft requires the use of glue, scissors, tweezers, and other tools which may be dangerous to young children. Please keep the
7、m out of reach of children while you work. Tools and MaterialsAssembly TipCaution Trace along the folds with a used pen (no-ink) to get a sharp, easier fold. Handy Hints A: Assemble the head and chest Make the head (1-17) Attaching the throat to the chin (31-38) Curl neck 1 into a ring, and attach i
8、t to the back of the head (39-52) Curl neck 2 into a ring, and attach to neck 1 (53-66) Align the spines on the left and right and attach Completed head Make the chin (18, 19, 20), and attach it to the head (21-30) A-1 Head A-3 Throat A-5 Neck 2 A-6 Chest A-4 Neck 1 A-2 Chin Align the spines on the
9、left and right and attach Attach the chest to neck 2 (67-70) Before you begin: For the spines on the iguanas back, the assembly instructions direct you to cut away the unnecessary gray pieces at the end. This is the most efficient method, but it can be difficult to cut the parts after they are glued
10、, so beginner paper crafters should cut the gray parts in advance. PAGE02 Marine iguana: Assembly Instructions B: Assemble the front legs Curve left leg 3 and attach it to left leg 2 (101-107), attach 108 and 109 and make it into a ring Curve right leg 1 and attach it to the right foot (121-126), ma
11、king a cylinder shape (127-132) Attach right leg 2 to right leg 1, rolling it as you attach (133-142) Curve right leg 3 and attach it to right leg 2 (143- 149), attach 150 and 151 and make it into a ring Open up glue tabs 152, 154 and 160 by making valley folds Open up glue tabs 156, 158 and 159 by
12、making valley folds Curve left leg 1 and attach it to the left foot (82-87), making a cylinder shape (88-92) After attaching 93, attach left leg 2 to left leg 1 (94-99), attach that to 100 and make it into a ring B-1 Left foot B-2 Left leg 1 B-3 Left leg 2 B-4 Left leg 3 B-5 Right foot B-6 Right leg
13、 1 B-7 Right leg 2 B-8 Right leg 3 Make the toes (71-80), glue 81 and make the whole thing into a ring Make the toes (110-119), glue 120 and make the whole thing into a ring PAGE03 Marine iguana: Assembly Instructions C: Connect the front legs and assemble the body Attach both the front legs to the
14、chest (152-158) Attach the front legs and chest to neck 2 (159-169), align the left and right spines and glue them together Do not glue these spines together Do not glue these spines together Attach the body 1 to chest (170-178) Attach the body 2 to body 1 (179-186) C-1 Body 1 C-2 Body 2 PAGE04 Mari
15、ne iguana: Assembly Instructions D: Assemble the back legs Curve left leg 1 and attach it to the left foot (199-207), making a cylinder shape (208) Attach the left leg 2 to left leg 1 (209-215) Attach the right leg 1 to right foot (238-247) Attach the right leg 3 to right leg 2 (257-263) Attach the
16、right leg 4 to right leg 3 (264-266) Attach the left leg 3 to left leg 2 (216-222) Attach the left leg 4 to left leg 3 (223- 225) Attach right leg 2 to right leg 1 (248- 254), and also attach 255 and 256 D-1 Left foot D-6 Right foot D-8 Right leg 2 D-9 Right leg 3 D-10 Right leg 4 D-7 Right leg 1 D-2 Left leg 1 D-3 Left leg 2 D-4 Left leg 3 D-5 Left leg 4 Make the toes (187-196), glue 197 and 198 and make the whole thing into a ring Make the toes (187-196), glue 197 and 198 and make the whol
